Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 601 — Trang 7/20

Code: C-1137

Description: The gate home sensor (PS16) does not turn ON within a specified period of time after the gate motor (M12) starts its operation. Or, PS16 does not turn OFF within a specified period of time after it turns ON.
Causes: FNS control board (FNSCB) Relay board (RB) Gate motor (M12) Gate home sensor (PS16)

Code: C-1138

Description: FNS conveyance motor (M1) is out of order. PLL does not become Low within a specified period of time after it starts its operation.
Causes: FNS conveyance motor (M1) FNS control board (FNSCB)

Code: C-1139

Description: The registration shutter home sensor (PS307) does not turn OFF within a specified period of time after the registration shutter motor (M303) starts its operation.
Causes: Registration shutter motor (M303) FNS control board (FNSCB)

Code: C-2101

Description: The lock signal of the charging cleaning motor (M14) is not detected when a specified period of time elapses after it starts the backward operation (from rear to front).
Causes: Charging cleaning motor (M14) Printer control board (PRCB)

Code: C-2102

Description: The lock signal of the charging cleaning motor (M14) is detected when a specified period of time elapses after it starts the backward operation (from rear to front). Or, the lock signal of M14 is not detected within a specified time after a specified time.
Causes: Charging cleaning motor (M14) Printer control board (PRCB)

Code: C-2103

Description: When in a retry after the lock detection, the lock signal of the charging cleaning motor (M14) is not detected when a specified period of time elapses after M14 starts the backward operation (from rear to front).
Causes: Charging cleaning motor (M14) Printer control board (PRCB)

Code: C-2104

Description: The transfer/separation cleaning home sensor (PS52) does not turn ON when a specified period of time elapses after the transfer/ separation cleaning motor (M10) starts the backward operation (from rear to front). Or, PS52 does not turn OFF when a specified period of time elapses after M10 starts the forward operation (from rear to front).
Causes: Transfer/separation cleaning motor (M10) ADU drive board (ADUDB) Printer control board (PRCB) Transfer/separation cleaning home sensor (PS52) Transfer/separation cleaning limit sensor (PS53)

Code: C-2105

Description: Either the transfer/separation cleaning home sensor (PS52) or the transfer/separation cleaning limit sensor (PS53) does not turn its status from ON to OFF or from OFF to ON when a specified period of time elapses after the transfer/separation cleaning motor (M10) starts its operation.
Causes: Transfer/separation cleaning motor (M10) ADU drive board (ADUDB) Printer control board (PRCB) Transfer/separation cleaning home sensor (PS52) Transfer/separation cleaning limit sensor (PS53)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie