Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub 750

Code: C-0101

Description: An error detection signal is detected in succession for a specified period of time after the paper feed motor (M1) is turned ON.
Causes: Paper feed motor (M1) Printer control board (PRCB)

Code: C-0102

Description: An error detection signal is detected in succession for a specified period of time after the LU paper feed motor (M101) is turned ON.
Causes: LU paper feed motor (M101) LU drive board (LUDB)

Code: C-0103

Description: An error detection signal is detected in succession for a specified period of time after the registration motor (M5) is turned ON.
Causes: Registration motor (M5) Printer control board (PRCB) ADU drive board (ADUDB)

Code: C-0202

Description: When the upper limit sensor /1 (PS2) is OFF, PS2 does not turn ON within a specified period of time after the paper lift motor /1 (M16) turns ON for its lifting operation.
Causes: Tray 1 Paper lift motor /1 (M16) Printer control board (PRCB) Upper limit sensor /1 (PS2)

Code: C-0204

Description: When the upper limit sensor /2 (PS8) is OFF, PS8 does not turn ON within a specified period of time after the paper lift motor /2 (M17) turns ON for its lifting operation.
Causes: Tray 2 Paper lift motor /2 (M17) Printer control board (PRCB) Upper limit sensor /2 (PS8)

Code: C-0206

Description: When the upper limit sensor /3 (PS14) is OFF, PS14 does not turn ON within a specified period of time after the paper lift motor / 3 (M18) turns ON for its lifting operation.
Causes: Tray 3 Paper lift motor /3 (M18) Printer control board (PRCB) Upper limit sensor /3 (PS14)

Code: C-0208

Description: When the upper limit sensor /4 (PS20) is OFF, PS20 does not turn ON within a specified period of time after the paper lift motor / 4 (M19) turns ON for its lifting operation.
Causes: Tray 4 Paper lift motor /4 (M19) Printer control board (PRCB) Upper limit sensor /4 (PS20)

Code: C-0209

Description: When the paper lift motor (M100) is ON, an error detection signal of M100 is detected in succession for a specified period.
Causes: LU. Paper lift motor (M100) LU drive board (LUDB) Lower limit sensor (PS101) Upper limit sensor (PS109)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie