Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C454 — Trang 24/29

Code: CC211

Description: Authentication device general error. When using the authentication device, authentication data is not to meet the specifications.
Remedy: • MFP board (MFPB) • Authentication device 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch.

Code: CC212

Description: User validation error. • An error occurred while validating the user authentication information. • The loadable device driver is not successfully installed.
Remedy: • MFP board (MFPB) • Authentication device 1 When this trouble code is generated after installing the loadable device driver, check to see if there is any file other than loadable device driver in USB memory used. If there is any file, reinstall the loadable device driver. - - 2 Check the USB cable for proper connection and correct as necessary. - - 3 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 4 Re-register the user authentication information. - - 5 Replace authentication device.

Code: CC213

Description: • User registration error • Card information setting error
Remedy: • MFP board (MFPB) • Authentication device 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 3 Reset the authentication settings. (card type, IC card advanced settings, and etc.) - - 4 Re-register the user authentication information.

Code: CC214

Description: User information deletion error The deletion of the user information is uncompleted.
Remedy: • MFP board (MFPB) • Authentication device 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch.

Code: CC216

Description: Acquisition failure of the number of trials/Initialize error of number of authentication. An error occurred during user authentication using optional authentication unit AU-102.
Remedy: • MFP board (MFPB) • Authentication device 1 Check the USB cable for proper connection and correct as necessary. - - 2 Turn OFF the main power switch, wait for 10 sec. or more, and turn ON the main power switch. - - 3 Reset the number of authentication trials.

Code: CD002

Description: JOB RAM save error. The error in save of job data to the memory/ hard disk and its read error are detected.
Remedy: • MFP board (MFPB) • Hard disk 1 Check the connector between hard disk-MFPB PJ11 for proper connection and correct as necessary. - - 2 Format hard disk. - - 3 Replace the hard disk. - - 4 Replace MFPB

Code: CD004, CD00F, CD020

Description: Hard disk access error (connection failure) Hard disk data transfer error Hard disk verify error
Remedy: • MFP board (MFPB) • Hard disk 1 Check the connector between hard disk-MFPB PJ11 for proper connection and correct as necessary. - - 2 Reinstall the hard disk. - - 3 Replace the hard disk. - - 4 Replace MFPB.

Code: CD010

Description: Hard disk unformat Unformatted hard disk is connected.
Remedy: • MFP board (MFPB) • Hard disk 1 Select [Service Mode] -> [State Confirmation] -> [Memory/HDD Adj.] -> [HDD Format], and conduct the HDD format function. - - 2 Replace the hard disk. - - 3 Replace MFPB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie