Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C552 — Trang 12/28

Code: C2555

Description: Abnormally low toner density detected yellow TCR sensor
• When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Causes: Imaging unit /C Imaging unit /M Imaging unit /Y Toner cartridge /C Toner cartridge /M Toner cartridge /Y Toner empty sensor/C (PZS/C) Toner empty sensor/M (PZS/M) Toner empty sensor/Y (PZS/Y) Toner supply motor/Y (M9) Toner supply motor/M (M10) Toner supply motor/C (M11) Toner cartridge motor Y/M (M13) Toner cartridge motor C/K (M14) Printer control board (PRCB)
Remedy: 1 Perform image troubleshooting procedure if image density is low. - - 2 Clean the TCR sensor window on the underside of the imaging unit if dirty - - 3 Reinstall imaging unit - - 4 Reinstall toner cartridge - - 5 M9, M10, M11 operation check (At this time, IU must be non-installation.) M9: PRCB CN19-1 to 4 M10: PRCB CN19-5 to 8 M11: PRCB CN19-9 to 12 C-21 6 M13, M14 operation check M13: PRCB CN20-5 to 8 M14: PRCB CN20-9 to 12 K-6 7 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them. - - 8 Change imaging unit - - 9 PRCB ICP1 or ICP2 conduction check - - 10 Change PRCB.

Code: C2556

Description: Abnormally high toner density detected yellow TCR sensor
• TC ratio in the developing unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
Causes: Imaging unit /C Imaging unit /M Imaging unit /Y Toner cartridge /C Toner cartridge /M Toner cartridge /Y Sub hopper unit Printer control board (PRCB)
Remedy: 1 Reinstall toner cartridge - - 2 Reinstall imaging unit - - 3 Change imaging unit - - 4 PRCB ICP17 conduction check - - 5 Change PRCB - - 6 Change sub hopper unit

Code: C2557

Description: Abnormally low toner density detected black TCR sensor
• When sampling data is determined in TC ratio calculation control, TCR sensor output is higher than a predetermined value for a predetermined number of times in a row even though there is toner in the sub hopper.
Causes: Drum unit /K Toner cartridge /K Toner empty sensor/K (PZS/K) Toner supply motor/K (M12) Toner cartridge motor C/K (M14) Printer control board (PRCB)
Remedy: 1 Perform image troubleshooting procedure if image density is low. - - 2 M12 operation check (At this time, IU must be non-installation.) PRCB CN19-13 to 16 C-20 3 M14 operation check PRCB CN20-9 to 12 K-6 4 Reinstall drum unit/K - - 5 Reinstall toner cartridge - - 6 If the toner empty sensor and its surroundings inside the sub hopper are dirtied with toner, clean them. - - 7 Change drum unit /K - - 8 Change PRCB.

Code: C2558

Description: Abnormally high toner density detected black TCR sensor
• TC ratio in the developing unit, which is determined by toner replenishing amount control mechanism, is a predetermined value or more for a given number of times consecutively.
Causes: Drum unit /K Toner cartridge /K Sub hopper unit Printer control board (PRCB)
Remedy: 1 Reinstall drum unit/K - - 2 Reinstall toner cartridge - - 3 Change drum unit/K - - 4 PRCB ICP17 conduction check - - 5 Change PRCB - - 6 Change sub hopper unit

Code: C2559

Description: Cyan TCR sensor adjustment failure
• TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value.
Causes: Imaging unit /C Imaging unit /M Imaging unit /Y Printer control board (PRCB)
Remedy: 1 Reinstall imaging unit - - 2 Change imaging unit - - 3 PRCB ICP1 or ICP2 conduction check - - 4 PRCB ICP17 conduction check - - 5 Change PRCB

Code: C255A

Description: Magenta TCR sensor adjustment failure
Causes: Imaging unit /C Imaging unit /M Imaging unit /Y Printer control board (PRCB)
Remedy: 1 Reinstall imaging unit - - 2 Change imaging unit - - 3 PRCB ICP1 or ICP2 conduction check - - 4 PRCB ICP17 conduction check - - 5 Change PRCB

Code: C255B

Description: Yellow TCR sensor adjustment failure
Causes: Imaging unit /C Imaging unit /M Imaging unit /Y Printer control board (PRCB)
Remedy: 1 Reinstall imaging unit - - 2 Change imaging unit - - 3 PRCB ICP1 or ICP2 conduction check - - 4 PRCB ICP17 conduction check - - 5 Change PRCB

Code: C255C

Description: Black TCR sensor adjustment failure
Causes: Drum unit /K Printer control board (PRCB)
Remedy: 1 Reinstall drum unit /K - - 2 Change drum unit /K - - 3 PRCB ICP17 conduction check - - 4 Change PRCB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie