Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C754 — Trang 27/28

Code: CD272

Description: i-Option activated and additional memory and HDD not installed. While the i-Option is activated, the additional memory included in UK-204 and the hard disk are not installed.
Causes: • MFP board (MFPB) • Hard disk • Memory board/2 (MEMB/2; UK-204)
Remedy: 1 Check the memory board/2 (MEMB/2; UK-204) for proper connection and correct as necessary. - - 2 Access [Service Mode] -> [System 2] -> [HDD] and check to see if “Installed” is selected. - - 3 Replace the memory board/2 (MEMB/2; UK-204) - - 4 Replace the hard disk - - 5 Replace MFPB

Code: CD370

Description: Nonvolatile data multiple errors. Multiple errors (Over 5) are detected by the abnormal check of each nonvolatile data.
Causes:
Remedy: 1 Touch [Yes] on the restore screen displayed on the control panel to restore data. - - NOTE • Do not replace the printer control board and SSD board at the same time with new ones or ones removed from other machines. The backup data will be lost and image failure may be caused.

Code: CD390

Description: Nonvolatile data checksum error. Checksum error is detected while nonvolatile data is being checked for error by each data. (The MFP board is replaced with a new one.)
Causes:
Remedy: 1 Touch [Yes] on the restore screen displayed on the control panel to restore data. - - NOTE • Do not replace the printer control board and SSD board at the same time with new ones or ones removed from other machines. The backup data will be lost and image failure may be caused.

Code: CD3A0

Description: Counter error. The total counter values provided by the MFP board and the SSD board are different.
Causes: • MFP board (MFPB) • SSD board (SSDB)
Remedy: 1 If this error occurs temporarily due to the use of the board removed from another machine, reinstall the original board. - - 2 Replace the current MFPB with a new one.

Code: CD401...CD412

Description: NACK command incorrect ACK command incorrect Checksum error Receiving packet incorrect Receiving packet analysis error ACK receiving timeout Retransmission timeout Touch panel board error Touch panel type mismatch
Causes: MFP board (MFPB)
Remedy: 1 Check whether there is a strong electromagnetic noise source near the main body. - - 2 Check the connectors on MFPB for proper connection and correct as necessary. - - 3 Replace MFPB

Code: CDF50, CDF70, CDFA0

Description: ASIC image version failure ASIC image access failure ASIC image error
Causes: • MFP board (MFPB) • CCD board (CCDB)
Remedy: 1 Check the connector between MFPB and CCDB for proper connection, and correct as necessary. 2 Update the firmware. - - 3 Replace CCDB - - 4 Replace MFPB

Code: CDF51, CDF71, CDFA1

Description: ASIC image version failure (back side) ASIC image access failure (back side) ASIC image error (back side). Communication error is detected between the MFP board (MFPB) and the dual scan image processing board (DSIPB).
Causes: • MFP board (MFPB) • Dual scan image processing board (DSIPB)
Remedy: 1 Check the connector between MFPB and DSIPB for proper connection, and correct as necessary. - - 2 Update the firmware. - - 3 Replace DSIPB - - 4 Replace MFPB

Code: CE001, CE003

Description: Abnormal message queue Task error
Causes: MFP board (MFPB)
Remedy: 1 Check the connectors on MFPB for proper connection and correct as necessary. - - 2 Replace MFPB
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie