Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub C8022 — Trang 14/15

Code: C3310

Description: CCD clamp/gain adjustment failure
• The adjustment value is 0 or 255 during a CCD clamp adjustment. • The peak value of the output data is 64 or less during a CCD gain adjustment.
Remedy: 1 Correct the harness connection between PWB-A and PWB-C if faulty. 2 Check for possible extraneous light and correct as necessary. 3 Clean the lens, mirrors, CCD surface, and shading sheet if dirty 4 Correct reflective mirror of the Scanner if faulty, or change Scanner. 5 Change PWB-A. 6 Change PWB-C.

Code: C3331

Description: MSC undefined malfunction occurring
• An undefined malfunction occurs in the MSC of the MFP Control Board (PWB-MFP).
Remedy: 1 Check the connectors on PWB-MFP for proper connection and correct as necessary. 2 Change PWB-MFP.

Code: C3332

Description: Scanner Section undefined malfunction
• An undefined malfunction occurs in the Scanner Section.
Remedy: 1 Correct the connector connection between PWBA and PWB-C if faulty. 2 Change PWB-C. 3 Change PWB-A.

Code: C3333

Description: Engine Section undefined malfunction
• An undefined malfunction occurs in the Engine Section (PWB-MC, etc.).
Remedy: 1 Check the PWB-MC connector for proper connection and correct as necessary. 2 Change PWB-MCB-A.

Code: C3E00, C3E01, C3E02

Description: NVRAM initialization failure
• Total Clear is executed in a mode other than the card line mode. • An initial command is issued from the terminal in a mode other than the card line mode. • A new NVRAM is detected in a mode other than the card line mode.
Remedy: 1 Check the PWB-MFP connector for proper connection and correct as necessary. 2 Change PWB-MFP.

Code: C3F00

Description: Vendor connection failure
• It is detected that communications with the vendor are interrupted for a given period of time or more with "Installed" selected for the setting of vendor installation.
Remedy: 1 Check the Vendor connector for proper connection and correct as necessary. 2 Check the PWB-MC connector for proper connection and correct as necessary. 3 Change PWB-MC.

Code: C3FFC

Description: ROM contents error upon startup (LPH)
• A fault is detected in a sequence of ROM contents check of the LPH Board during starting.
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.

Code: C3FFD

Description: ROM contents error upon startup (Scanner)
• A fault is detected in a sequence of ROM contents check of the PWB-C during starting.
Remedy: 1 Check the ROM version. 2 Rewrite firmware using the Compact Flash card.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie