Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub PRESS 1250p — Trang 62/94

Code: C-1521

Description: The driven arm /Rt swing operation start has not been completed within a specified period of time after the cover paper conveyance arm motor /Rt (M43) turns ON
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper conveyance arm motor / Rt (M43) DIPSW7-6
Remedy: 1. Check the cover paper conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503:12-D) 5. Replace M43. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1522

Description: The driven arm /Lt swing operation start has not been completed within a specified period of time after the cover paper conveyance arm motor /Lt (M44) turns ON
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper conveyance arm motor / Lt (M44) DIPSW7-6
Remedy: 1. Check the cover paper conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PB-503: 13-D) 5. Replace M44. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1523

Description: The cover paper conveyance start has not been completed within a specified period of time after cover paper conveyance motor (M45) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper conveyance motor (M45) DIPSW7-6
Remedy: 1. Check the cover paper conveyance section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram: PB-503: 13-D) 5. Replace M45. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1524

Description: The cover paper table up or down movement has not been completed within a specified period of time after the cover paper table up down motor /Fr (M46) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper table up down motor /Fr (M46) DIPSW7-6
Remedy: 1. Check the cover paper table up down section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503: 11-D) 5. Replace M46. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1525

Description: The cover paper table up or down movement has not been completed within a specified period of time after the cover paper table up down motor /Rr (M47) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper table up down motor /Rr (M47) DIPSW7-6
Remedy: 1. Check the cover paper table up down section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503: 11-D) 5. Replace M47. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1526

Description: The movement of the cover paper folding plate / Rt has not been completed within a specified period of time after the cover paper folding motor /Rt (M48) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper folding motor /Rt (M48) DIPSW7-6
Remedy: 1. Check the cover paper folding section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503: 14-D) 5. Replace M48. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1527

Description: The movement of the cover paper folding plate / Lt has not been completed within a specified period of time after the cover paper folding motor /Lt (M49) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cover paper folding motor /Lt (M49) DIPSW7-6
Remedy: 1. Check the cover paper folding section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503: 14-D) 5. Replace M49. 6. Replace PBDB1. 7. Replace PBCB.

Code: C-1528

Description: The trimming of the cover paper has not been completed within a specified period of time after the cutter motor (M50) turns ON.
Causes: • PB control board (PBCB) • PB drive board (PBDB) • Cutter motor (M50) DIPSW7-6
Remedy: 1. Check the trimmer section, and clean/repair it if any abnormality. 2. Check the connector connection and the wiring between PBDB/PBDB1 and the motor, and repair it if any abnormality. 3. Check the connector connection and the wiring between PBDB/PBDB1 and PBCB, and repair it if any abnormality. 4. Check the I/O drive of the motor and the coupling of the gear, and repair/replace it if any abnormality. (Wiring diagram:PB-503: 14-D) 5. Replace M50. 6. Replace PBDB1. 7. Replace PBCB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie