• Code: SC46-62
• Description: The print operation starts before the paper mis-centering adjustment is terminated. (The mis-centering adjustment is too late.)
• Causes: Centering sensor (PS54)
• Remedy: Error codes are not displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. The control of the main body is made by using a data previously obtained.

• Code: SC46-63
• Description: The AGC is retried due to the decreased light volume of the exposure lamp. However, no error occurs.
• Causes: Exposure lamp (L1)
• Remedy: Error codes are not displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. The control of the main body is made by using a data previously obtained.

• Code: SC46-64
• Description: A PWM gamma curve is not created properly.
• Causes: Toner control sensor board (TCSB)
• Remedy: Error codes are not displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. The control of the main body is made by using a data previously obtained.

• Code: SC46-66
• Description: Shift amount abnormality while in the repeat (when the width is specified, or in the auto mode). When the shift amount while in the repeat is negative (-).
• Causes: Toner control sensor board (TCSB)
• Remedy: Error codes are not displayed on the operation board, but displayed only on the data collection, the list output and the CSRC. The control of the main body is made by using a data previously obtained.

• Code: SC46-80
• Description: The message queue is insufficient or destroyed.
• Causes: Image processing program
• Remedy: If there is a copy being made, the main body completes the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC46-81
• Description: The parameter value is in excess of the permissible limits.
• Causes: Image processing board (IPB)
• Remedy: If there is a copy being made, the main body completes the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC46-82
• Description: The ID of the task that sends the message queue is undefined.
• Causes: Image processing board (IPB)
• Remedy: If there is a copy being made, the main body completes the paper exit before stopping operations. Turn OFF the RL1 (main).

• Code: SC46-83
• Description: The receiving event of the message is undefined.
• Causes: Image processing board (IPB)
• Remedy: If there is a copy being made, the main body completes the paper exit before stopping operations. Turn OFF the RL1 (main).