Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 920 — Trang 16/32

Code: SC46-27#

Description: A density conversion gamma curve cannot be created normally.
Causes: Overall control board (OACB)

Code: SC46-29

Description: Calibration start abnormality
Causes: Overall control board (OACB) OACB program

Code: SC46-30

Description: Calibration completion abnormality.
Causes: Overall control board (OACB) OACB program

Code: SC46-31

Description: Despite of the MPC not being terminated, the initial sampling of the APC is attempted.
Causes: Overall control board (OACB) OACB program

Code: SC46-32

Description: While executing the APC, the execution of the MPC is attempted.
Causes: Overall control board (OACB) OACB program

Code: SC46-34

Description: When a clock for the image write is abnormal, the sub scan beam interval is attempted to be corrected.
Causes: Overall control board (OACB) OACB program

Code: SC46-35

Description: Sequentially shot page area abnormality. Due to an image area abnormality on the memory, images cannot be developed on the memory.
Causes: Overall control board (OACB) OACB program

Code: SC46-36

Description: The PVV is turned ON before the initial APC start processing is completed.
Causes: Polygon motor (M17) Overall control board (OACB) OACB program Printer control board (PRCB) PRCB program
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie