Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta bizhub Pro 951 — Trang 93/94

Code: C-D001

Description: Hard disk /1 (HDD1) initialization abnormality. HDD1 is defective, or the connector is poorly connected.
Causes: • Hard disk /1 (HDD1) • Overall control board (OACB)
Remedy: 1. Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. 2. Execute output check code "99-03" in I/O check mode. 3. Replace HDD1.

Code: C-D002

Description: JOB_RAM storage abnormality. The JOB information cannot be stored on the hard disk /1 (HDD1).
Causes: • Hard disk /1 (HDD1) • Overall control board (OACB)
Remedy: 1. After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. 2. Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. (Wiring diagram: Main body (1/4): 11-N, Main body (4/4): 10-D) 3. Reinstall the firmware related to the overall control. 4. Replace HDD1.

Code: C-D003

Description: Hard disk /1 (HDD1) periodic cleaning abnormality. While in a periodical cleaning, opening the rote to hard disk is not succeeded.
Causes: • Hard disk /1 (HDD1) • Overall control board (OACB)
Remedy: 1. After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. 2. Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. (Wiring diagram: Main body (1/4): 11-N, Main body (4/4): 10-D) 3. Reinstall the firmware related to the overall control. 4. Replace HDD1.

Code: C-D004

Description: Hard disk /1 (HDD1) access defective. HDD1 is defective, or the connector is poorly connected.
Causes: • Hard disk /1 (HDD1) • Overall control board (OACB)
Remedy: 1. After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. 2. Check the connector connection and the wiring between OACB and HDD1, and repair it if any abnormality. (Wiring diagram: Main body (1/4): 11-N, Main body (4/4): 10-D) 3. Reinstall the firmware related to the overall control. 4. Replace HDD1.

Code: C-D010

Description: Hard disk /1 (HDD1) overwrite erase execution. HDD1 overwrite erase is executed.
Causes: Hard disk /1 (HDD1)
Remedy: 1. Execute output check code "99-03" in I/O check mode. 2. Replace HDD1.

Code: C-D080

Description: The common API related HDD file on the hard disk / 1 (HDD1) is crushed
Causes: Hard disk /1 (HDD1)
Remedy: 1. Execute output check code "99-03" in I/O check mode. 2. Replace HDD1.

Code: C-E001

Description: Message queue error. The message queue is insufficient or destroyed.
Causes: Overall control board (OACB)
Remedy: 1. After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. 2. Reinstall the firmware related to the overall control. 3. Replace OACB.

Code: C-E002

Description: Message parameter value error. The parameter value is in excess of the permissible limits.
Causes: Overall control board (OACB)
Remedy: 1. After turning OFF the sub power switch, turn OFF the main power switch and unplug the power plug. Restart the main body after 10 seconds. 2. Reinstall the firmware related to the overall control. 3. Replace OACB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie