Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di200

Code: C0000

Description: Main Motor malfunction
The Lock signal remains HIGH for a continuous 1-sec. period while the Main Motor remains energized.
Remedy: 1 Main Motor operation check: the voltage across PJ1-3 of the Main Motor and GND changes from DC5 V to DC0 V when the Side Cover is opened and closed. YES Check various parts for possible overload. Change Main Motor. NO Change Master Board.

Code: C0010

Description: I/C Motor malfunction
The Lock signal remains HIGH for a continuous 1-sec. period while the I/C Motor remains energized.
Remedy: 1 I/C Motor operation check: the voltage across PJ2-3 of the I/C Motor and GND changes from DC5 V to DC0 V when the Side Cover is opened and closed. YES Check various parts for possible overload. Change I/C Motor. NO Change Master Board.

Code: C0045

Description: Cooling Fan Motor malfunction
The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Cooling Fan Motor remains energized.
Remedy: 1 Cooling Fan Motor operation check: the voltage across CN6-8 on the side of Master Board and GND changes from DC0 V to DC24 V when the Power Switch is turned ON. YES Change Cooling Fan Motor. NO Change Master Board.

Code: C004C

Description: Ozone Fan Motor malfunction
The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Ozone Fan Motor remains energized.
Remedy: 1 Ozone Fan Motor operation check: the voltage across CN18-3 on the side of Master Board and GND changes from DC0 V to DC24 V when the Power Switch is turned ON. YES Change Ozone Fan Motor. NO Change Master Board.

Code: C004E

Description: Power Unit Cooling Fan Motor malfunction
The Lock signal remains HIGH or LOW for a continuous 1-sec. period or more while the Power Unit Cooling Fan Motor remains energized.
Remedy: 1 Power Unit Cooling Fan Motor operation check: the voltage across CN2-3 on the side of Master Board and GND changes from DC0 V to DC24 V when the Power Switch is turned ON. YES Change Power Unit Cooling Fan Motor. NO Change Master Board.

Code: C0070

Description: Main Hopper Toner Replenishing Motor malfunction
• The Toner Bottle Home Position Sensor remains blocked (L) for a continuous 2-sec. period or more while the Main Hopper Toner Replenishing Motor remains energized. • The Toner Bottle Home Position Sensor remains unblocked (H) for a continuous 6-sec. period or more while the Main Hopper Toner Replenishing Motor remains energized.
Remedy: 1 Main Hopper Toner Replenishing Motor operation check: • Remove the Lower Rear Cover. • Unlock the Toner Bottle Lock Lever. • Block the Toner Bottle Cover Sensor. • Turn the Toner Bottle a half turn by hand. The Toner Bottle turns when the Toner Bottle Cover Sensor is unblocked under the above conditions. YES Check step 3. 2 Main Hopper Toner Replenishing Motor operation check: the voltage across CN43-2 on the side of Master Board and GND changes from DC0 V to DC24 V when step 1 is performed. YES Change Main Hopper Toner Replenishing Motor. NO Change Master Board. 3 Toner Bottle Home Position Sensor operation check through I/O check YES Change Master Board. NO Change Toner Bottle Home Position Sensor.

Code: C0214

Description: Abnormal image transfer voltage
The image transfer voltage remains more than 100 V for a continuous 0.1-sec. period or more while the PC Drum remains stationary (except while an F2 operation is being run).
Remedy: 1 The voltage across CN11-1 on the side of Power Supply Unit and GND is DC24 V. The voltage across CN11-2 on the side of Power Supply Unit and GND is DC5 V. NO Change Power Supply Unit. 2 The voltage across CN17-12 on the side of Master Board and GND remains DC1.2 V or less while the malfunction code is being displayed. YES Change Master Board. 3 The voltage across CN17-15 on the side of Master Board and GND remains DC0.9 V or more while the malfunction code is being displayed. YES Change Master Board. NO Change High Voltage Unit.

Code: C0500

Description: Warming-up failure
The temperature of the Fusing Rollers does not reach the required level even after the lapse of a given period of time during a warm-up cycle. • From room temperature to 100 °C: Within 65 sec. • From 100 °C to 140 °C: Within 30 sec. • From 140 °C to 170 °C: Within 20 sec. • From 170 °C to the completion of warming-up: Within 22 sec.
Remedy: 1 Fusing Roller Heater Lamp turns ON when the Side Cover is opened and closed. NO Check step 3 and onward. 2 The resistance of Fusing Roller Thermistor (across CN25-2 and 3 on the Fusing Unit end) is infinity. YES Change Fusing Roller Thermistor. NO Change Master Board. 3 There is continuity across CN3-1 and 2 on the Fusing Unit end. YES Check step 7. 4 Fusing Roller Heater Lamp is conducting. NO Change Fusing Roller Heater Lamp. 5 Fusing Roller Thermostat is conducting. NO Change Fusing Roller Thermostat. 6 Fusing Roller Heater Lamp Fuse is conducting. NO Change Fusing Roller Heater Lamp Fuse. 7 There is continuity across 1A and 1B, and across 2A and 2B, when Side Cover Interlock Switch 2 is actuated. YES Change Power Supply Unit. Change Master Board. NO Change Side Cover Interlock Switch 2.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie