Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di2510 — Trang 7/7

Code: C13D0

Description: EEPROM Failure
• An EEPROM where no initial data is written is detected.
Remedy: 1 Unplug and plug in the power cord, and then turn off and turn on the copier. 2 Check the EEPROM on the Master Board for proper connection, and correct as necessary. 3 Replace PWB-A. 4 Replace the EEPROM.

Code: C13E0

Description: Flash ROM Failure
• The Flash ROM data was determined to be faulty when the unit was turned on.
Remedy: 1 Unplug and plug in the power cord, and then turn off and turn on the copier. 2 The firmware data is overwritten. 3 Replace PWB-A.

Code: C13F0

Description: HSYNC Detection Failure
• No SOS falling edges are detected within the set period of time after laser emission began while the Polygon Motor is turning. • No SOS falling edges are detected while VIA remains ON.
Remedy: 1 Turn the copier off, then on again. 2 Check PH Unit and the Master Board connectors for proper connection, and correct as necessary. 3 Replace the PH Unit. 4 Replace PWB-A.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie