Danh mục sản phẩm

Code :

Code: C13F7
Description: Sub-scanning direction beam position adjustment failure
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C13F8
Description: Main scanning direction beam position adjustment failure
Remedy:

Code: C13F9
Description: EEPROM communications error
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Master Board.

Code: C13FA
Description: LD2 out of correction range
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C13FC
Description: APC failure
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the PH Unit. 3. If the same malfunction is detected again, change the PH Unit. 4. If the malfunction is detected a third time, change Image Processing Board.

Code: C1401
Description: IR main routine timeout
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.

Code: C1402
Description: IR illegal interrupt vector occurred
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.

Code: C1410
Description: IR watchdog
Remedy: 1. Reset the malfunction. 2. If the same malfunction persists, change the Image Processing Board.

‹ First < 9 10 11 12 13 14 15 >

0