Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di551 — Trang 8/22

Code: F18-21

Description: Tray 2
PS8 (tray upper limit/2) does not turn ON within 20 seconds (Di551/Di650)/ 27 seconds (Di5510/Di7210)since the lifting motion triggered by activating M17 (tray up drive /2) has started while PS8 is turned OFF.
Causes: M17 (tray up drive /2) PRCB (printer control board) PS8 (tray upper limit/2)

Code: F18-30

Description: Tray 3
Error detection signal for M18 (tray up drive /3) is detected while M18 is turned ON.
Causes: M18 (tray up drive /3) PRCB (printer control board) PS14 (tray upper limit/3)

Code: F18-31

Description: Tray 3
PS14 (tray upper limit/3) does not turn ON within 20 seconds since the lifting motion triggered by activating M18 (tray up drive /3) has started while PS14 is turned OFF.
Causes: M18 (tray up drive /3) PRCB (printer control board) PS14 (tray upper limit/3)

Code: F18-40

Description: Tray 4
Error detection signal for M19 (tray up drive /4) is detected while M19 is turned ON.
Causes: M19 (tray up drive /4) PRCB (printer control board) PS20 (tray upper limit/4)

Code: F18-41

Description: Tray 4
PS20 (tray upper limit/4) does not turn ON within 20 seconds since the lifting motion triggered by activating M19 (tray up drive /4) has started while PS20 is turned OFF.
Causes: M19 (tray up drive /4) PRCB (printer control board) PS20 (tray upper limit/4)

Code: F18-50

Description: LCT
Error detection signal for M100 (LT up/ down) is detected continuously for one second while M100 is turned ON.
Causes: M100 (LT up/down) LTDB (LT drive board) PS101 (LT lower limit detection) PS109 (LT upper limit detection)

Code: F18-51

Description: LCT
PS109 (LT upper limit detection) or PS101 (LT lower limit detection) does not turn ON within 35 seconds since the lifting or descent motion triggered by activating M100 (LT up/down) has started while PS109 or PS101 is turned OFF.
Causes: M100 (LT up/down) LTDB (LT drive board) PS101 (LT lower limit detection) PS109 (LT upper limit detection)

Code: F18-60

Description: By-pass feed
PS34 (tray upper limit/BP) or PS35 (tray lower limit/BP) does not turn ON within 10 seconds since the upward or downward motion triggered by activating M20 (up/down/BP) has started while PS34 or PS35 is turned OFF.
Causes: M20 (up/down/BP) PRCB (printer control board) PS34 (tray upper limit/BP) PS35 (tray lower limit/BP)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie