Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di5510 — Trang 13/22

Code: F36-01

Description: Fixing sensor abnormality
TH1 (fixing temperature /1) has not reached 50°C when the specified time has passed since the fixing ON control has been processed after SW2 (sub power) is turned on.
Causes: PRCB (printer control board) DCPS (DC power supply unit) L2 (fixing heater lamp/1) L3 (fixing heater lamp/2) TH1 (fixing temperature /1) TH2 (fixing temperature /2)

Code: F36-02

Description: Fixing sensor abnormality
The output voltage of TH2 (fixing temperature /2) is detected as abnormality low (less than -6°C) or abnormally high (more than 240.5°C) at the comparator circuit.
Causes: PRCB (printer control board) DCPS (DC power supply unit) L2 (fixing heater lamp/1) L3 (fixing heater lamp/2) TH1 (fixing temperature /1) TH2 (fixing temperature /2)

Code: F41-01

Description: Scanner abnormality
PS61 (scanner HP) does not turn ON within 5 seconds since M11 (scanner) has turned ON.
Causes: M11 (scanner) PS61 (scanner HP) SCDB (scanner drive board) PRCB (printer control board)

Code: F41-02

Description: Motor abnormality
The lock signal for M15 (polygon) is not detected within 25 seconds from the switch drive when M15 starts or when switching the rotation speed.
Causes: M15 (polygon) PMDB (polygon drive board) PRCB (printer control board)

Code: F42-01

Description: Fan abnormality
An error for EM signal is detected when 2 seconds have passed since FM9 (scanner cooling) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
Causes: FM9 (scanner cooling) SCDB (scanner drive board) PRCB (printer control board))

Code: F42-02

Description: Fan abnormality
An error for WRFAN1_EM signal is detected when 2 seconds have passed since FM2 (write section cooling) has turned ON. The error does not clear after 2 seconds from the OFF/ON operation.
Causes: FM2 (write section cooling) PRCB (printer control board)

Code: F46-40

Description: Image control abnormality
Hard disk initialization abnormality Hard disk failure, or poor connection of connectors
Causes: ICB (image control board) ICB program HDD (hard disk drive)

Code: F46-41

Description: Image control abnormality
Job information could not be stored on the hard disk.
Causes: ICB (image control board) ICB program HDD (hard disk drive)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie