Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Di7210 — Trang 17/22

Code: F77-22

Description: FN-112/6/ 121/10/115 abnormality
After M716 (alignment /L) starts operation, PS724 (alignment HP/L) does not turn ON within the specified time.
Causes: FNSCB (FNS control board) RB (relay board) M716 (alignment /L) PS724 (alignment /L)

Code: F77-25

Description: FN-112/6/ 121/10/115 abnormality
PS22(folding knife HP) does not go ON within the specified time after M19(folding knife) starts operation of HP detection.
Causes: FNS CB (FNS control board) M19 (folding knife) PS22 (folding knife HP)

Code: F77-26

Description: FN-112/6/ 121/10/115 abnormality
After M720 (folding conveyance) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M720 (folding conveyance)

Code: F77-3

Description: FN-112/6/ 121/10/115 abnormality
After M705 (alignment /U) starts operation, PS708 (alignment HP/U) does not turn OFF within the specified time, or does not turns ON after OFF.
Causes: FNSCB (FNS control board) RB (relay board) M705 (alignment /U) PS708 (alignment HP/U)

Code: F77-4

Description: FN-112/6/ 121/10/115 abnormality
After M707 (paper feed roller) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M707 (paper exit roller)

Code: F77-41

Description: Cover Inserter B/E abnormality
After M202 (tray up/down /L) starts operation, PS209 (tray upper limit /L) or PS210 (tray lower limit /L) do not turn ON within the specified time.
Causes: FNSCB (FNS control board) PIDB (PI drive board) M202 (tray up/down /L) M209 (tray upper limit /L) PS210 (tray lower limit /L)

Code: F77-42

Description: Cover Inserter B/E abnormality
After M201 (tray up/down/ U) starts operation, PS204 (tray upper limit /U) or PS205 (tray lower limit /U) do not turn ON within the specified time.
Causes: FNSCB (FNS control board) PIDB (PI drive board) M201 (tray up/down /U) PS204 (tray upper limit /U) PS205 (tray lower limit /U)

Code: F77-43

Description: Cover Inserter B/E abnormality
After M203 (PI conveyance) starts operation, it does not reach the prescribed speed within the specified time.
Causes: FNSCB (FNS control board) M203 (PI conveyance)
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie