Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Konica-Minolta Magicolor 1650EN — Trang 3/3

Code: 13DD

Description: Backup data error
• The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON.
Remedy: 1 Confirm mounting status of EEPROM on the printer control board, and make modification if necessary. 2 Change PRCB.

Code: 13E2

Description: Flash ROM write error
• Flash ROM writing is found faulty during a check.
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

Code: 13F0

Description: Engine control failure
• An undefined malfunction occurs in the engine section (PRCB, etc.).
Remedy: 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PRCB. 3 Change MFPB.

Code: 3C00

Description: EEPROM installation error
• Contact the responsible people of KONICA MINOLTA when not
Remedy:

Code: 3C10

Description: EEPROM data error
returning in power switch OFF/ON.
Remedy:
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie