Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera DC6090 — Trang 5/9

Code: C630

Description: Fixing unit thermistor wire broken--The data generated by the fixing unit thermistor remains at F1H or above for longer than two minutes while fixing unit heaters M and S are on.

Code: C640

Description: Fixing unit thermistor wire shorted/abnormally high temperature detected--Data from the fixing unit thermistor remains at 45H or less for 160 ms or longer.

Code: C641

Description: Fixing unit thermistor abnormally low temperature detected--The signal from the fixing unit thermistor registers 100C or lower during standby or a copying cycle after secondary stabilization.

Code: C710

Description: Toner sensor problem--Data from the toner sensor remains at 14H or less, or F0H or above for 320 ms.

Code: C720

Description: Drum thermistor wire broken--The signal from the drum thermistor remains high for 5 s.

Code: C730

Description: Drum thermistor shorted/abnormally high temperature detected--The signal from the drum thermistor remains low for 5 s.

Code: C731

Description: Drum thermistor abnormally low temperature detected--The drum heater remains on at 100% output for 17 minutes with the safety switches on.

Code: C740

Description: Internal temperature thermistor broken--Data from the internal temperature thermistor remains at 0CH or less for 320 ms.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie