Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera ECOSYS FSC8600DN

Code: 0100

Description: Backup memory device error
Causes: Defective EEPROM. Defective main PWB.
Remedy: Defective EEPROM. Replace the main PWB and check for correct operation.
Defective main PWB. Replace the main PWB and check for correct operation.

Code: 0120

Description: MAC address data error
For data in which the MAC address is invalid.
Causes: Defective EEPROM. Defective engine PWB.
Remedy: Defective EEPROM. Replace the main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 0150

Description: Backup memory read/write error (engine PWB)
No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated 5 times successively. Mismatch of reading data from 2 locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively.
Causes: Improper installation EEPROM. Defective engine PWB. Device damage of EEPROM.
Remedy: Improper installation EEPROM. Check the installation of the EEPROM and remedy if necessary.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Device damage of EEPROM. Contact the Service Administrative Division.

Code: 0160

Description: Backup memory data error (engine PWB)
Reading data from EEPROM is abnormal.
Causes: Data damage of EEPROM.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.

Code: 0170

Description: Billing counting error
A checksum error is detected in the main and engine backup memories for the billing counters.
Causes: Data damage of EEPROM. Defective PWB.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.
Defective PWB. Replace the DF main PWB or the engine PWB and check for correct operation.

Code: 0180

Description: Machine number mismatch
Machine number of main and engine does not match.
Causes: Data damage of EEPROM.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.

Code: 0640

Description: Hard disk error
The hard disk cannot be accessed.
Causes: Defective connector cable or poor contact in the connector. Defective hard disk. Defective main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable.
Defective hard disk. Run U024 (HDD formatting) without turning the power off to initialize the hard disk. Replace the hard disk drive and check for correct operation if the problem is still detected after initialization.
Defective main PWB. Replace the main PWB and check for correct operation.

Code: 0800

Description: Image processing error
JAM010X is detected twice.
Causes: Defective main PWB.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie