Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera ECOSYS FSC8650DN — Trang 18/26

Code: 7244

Description: Broken developer thermistor Y wire
The sensor input sampling is greater than 230.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor Y. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor Y. Replace developer unit Y.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7251

Description: Short-circuited developer thermistor K
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor K. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit K and front PWB (YC9) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor K. Replace developer unit K.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7252

Description: Short-circuited developer thermistor C
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor C. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit C and front PWB (YC13) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor C. Replace developer unit C.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7253

Description: Short-circuited developer thermistor M
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor M. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor M. Replace developer unit M.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7254

Description: Short-circuited developer thermistor Y wire
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector. Defective developer thermistor Y. Defective engine PWB
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor Y. Replace developer unit Y.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7401

Description: Developer unit K type mismatch error
Absence of the developer unit K is detected.
Causes: Defective connector cable or poor contact in the connector. Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit K and front PWB (YC9) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7402

Description: Developer unit C type mismatch error
Absence of the developer unit C is detected.
Causes: Defective connector cable or poor contact in the connector. Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit C and front PWB (YC13) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7403

Description: Developer unit M type mismatch error
Absence of the developer unit M is detected.
Causes: Defective connector cable or poor contact in the connector. Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie