Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera ECOSYS M2530dn — Trang 4/5

Code: 6000

Description: Broken Fuser heater wire
The fuser temperature does not rise after the Fuser heater has been turned on.
Causes: Poor contact in the fuser thermistor connector terminals. Poor contact in the Fuser heater connector terminals. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire.
Remedy: Poor contact in the fuser thermistor connector terminals. Reinsert the connector.
Poor contact in the Fuser heater connector terminals. Reinsert the connector.
Fuser thermistor installed incorrectly. Replace the fuser unit.
Fuser thermal cutout triggered. Replace the fuser unit.
Fuser heater installed incorrectly. Replace the fuser unit.
Broken Fuser heater wire. Replace the fuser unit.

Code: 6020

Description: Abnormally high fuser thermistor temperature
Fuser thermistor detects abnormally temperature. When the temperature of a fuser thermistor detects 195 °C or more at the time of heater OFF and 155 °C or more.
Causes: Shorted fuser thermistor. Defective control PWB.
Remedy: Shorted fuser thermistor. Replace the fuser unit.
Defective control PWB. Replace the control PWB.

Code: 6030

Description: Broken fuser thermistor wire
Input from fuser thermistor is 0 (A/D value).
Causes: Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire.
Remedy: Poor contact in the fuser thermistor connector terminals. Reinsert the connector.
Broken fuser thermistor wire. Replace the fuser unit.
Fuser thermistor installed incorrectly. Replace the fuser unit.
Fuser thermal cutout triggered. Replace the fuser unit.
Fuser heater installed incorrectly. Replace the fuser unit.
Broken Fuser heater wire. Replace the fuser unit.

Code: 6400

Description: Zero cross signal error
The zero cross signal does not reach the control PWB for specified time.
Causes: Defective harness between high voltage PWB (CN202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (CN201). Defective power source PWB. Defective control PWB.
Remedy: Defective harness between high voltage PWB (CN202) and control PWB (YC23), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective connection between power source PWB (YC103) and high voltage PWB (CN201). Reinsert the connector.
Defective power source PWB. Replace the power source PWB.
Defective control PWB. Replace the control PWB.

Code: 7990

Description: Waste toner full
The waste toner sensor has detected that the waste toner reservoir (drum unit) is full.
Causes: Waste toner reservoir (drum unit) is full. Defective waste toner sensor. Defective control PWB.
Remedy: Waste toner reservoir (drum unit) is full. Turn the power switch off/on to restart the machine. If the error is not resolved, replace the drum unit.
Defective waste toner sensor. Replace the waste toner sensor.
Defective control PWB. Replace the control PWB.

Code: F000

Description: Control PWB - Operation panel PWB communication error
Causes: Defective harness between operation panel PWB (YC1) and control PWB (YC7), or improper connector insertion. motor is ON. Defective operation panel PWB. Defective control PWB.
Remedy: Defective harness between operation panel PWB (YC1) and control PWB (YC7), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective operation panel PWB. Replace the operation panel PWB.
Defective control PWB. Replace the control PWB.

Code: F020

Description: Control PWB RAM checksum error
Causes: Defective main memory (RAM) on the control PWB. Defective expanded memory (DIMM).
Remedy: Defective main memory (RAM) on the control PWB. Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB.
Defective expanded memory (DIMM). Replace the expanded memory (DIMM).

Code: F040

Description: Control PWB engine communication error
A communication error is detected.
Causes: Defective control PWB.
Remedy: Defective control PWB. Turn the power switch off/on to restart the machine. If the error is not resolved, replace control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie