Description: Drive lock detection by engine firmware The main motor was left rotating when monitoring it in the regular interval (monitored also during the maintenance mode)
Remedy: Main/Engine PWB Turn the power switch off and on If not corrected, replace the main/ engine PWB.
Description: High voltage remote control error detection It was detected that the high voltage remote signal (synchronized with the feed motor remote) is on while the drum is not driven
Remedy: Main/Engine PWB Turn the power switch off and on If not corrected, replace the main/ engine PWB.
Description: Unexpected engine firmware control detection? (Preventing the solenoid from continuously being on) The solenoid was continuously on for the specified time or more
Remedy: Main/Engine PWB Turn the power switch off and on If not corrected, replace the main/ engine PWB.