Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera ECOSYS P6035cdn — Trang 4/13

Code: 2202

Description: Drum motor KM steadystate error After motor is stabilized, the stable signal is turned OFF for continuous 2 s.
Remedy: Drum unit K or Drum unit M Check that the drum can be rotated by hand, and if it is locked, replace the drum unit K or drum unit M.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. Drum motor KM and Engine relay PWB (YC13) Engine relay PWB (YC1) and Main/Engine PWB (YC4)
Drive transmission system for the drum motor KM 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check broken couplings and gears, and replace if any.
Drum motor KM Replace the drum motor KM.
Engine relay PWB Replace the engine relay PWB.
Main/Engine PWB Replace the Main/Engine PWB.

Code: 2211

Description: Drum motor CY startup error After the motor starting, the stable signal is not turned ON within 3 s.
Remedy: Drum unit C or Drum unit Y Check that the drum can be rotated by hand, and if it is locked, replace the drum unit C or drum unit Y.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. Drum motor CY and Engine relay PWB (YC13) Engine relay PWB (YC1) and Main/Engine PWB (YC4)
Drive transmission system for the drum motor CY 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check broken couplings and gears, and replace if any.
Drum motor CY Replace the drum motor CY.
Engine relay PWB Replace the engine relay PWB.
Main/Engine PWB Replace the Main/Engine PWB.

Code: 2212

Description: Drum motor KM startup error After the motor starting, the stable signal is not turned ON within 3 s.
Remedy: Drum unit K or Drum unit M Check that the drum can be rotated by hand, and if it is locked, replace the drum unit K or drum unit M.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. Drum motor KM and Engine relay PWB (YC13) Engine relay PWB (YC1) and Main/Engine PWB (YC4)
Drive transmission system for the drum motor KM 1. Check if the couplings and gears rotate smoothly, and if not, clean or grease the gears. 2. Check broken couplings and gears, and replace if any.
Drum motor KM Replace the drum motor KM.
Engine relay PWB Replace the engine relay PWB.
Main/Engine PWB Replace the Main/Engine PWB.

Code: 2500

Description: Paper feed motor error After the motor starting, the stable signal is not turned ON within 3 s. After motor is stabilized, the stable signal is turned OFF for continuous 2 s.
Remedy: Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. Paper conveying and developer motor and Engine relay PWB (YC15) Engine relay PWB (YC1) and Main/Engine PWB (YC4)
Drive transmission system for the Paper conveying and developer motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged.
Paper conveying and developer motor Replace the Paper conveying and developer motor.
Engine relay PWB Replace the engine relay PWB.
Main/Engine PWB Replace the Main/Engine PWB.

Code: 2600

Description: PF drive motor 1 error (PF1) During the motor drive, the stable signal is not turned on for continuous 5 s.
Remedy: Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. PF drive motor 1 and PF1 main PWB (YC6)
Drive transmission system for the PF drive motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged.
PF drive motor 1 Replace the PF drive motor 1.
PF main PWB Replace the PF main PWB..

Code: 2610

Description: PF drive motor 2 error (PF2) During the motor drive, the stable signal is not turned on for continuous 5 s.
Remedy: Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. PF drive motor 2 and PF2 main PWB (YC6)
Drive transmission system for the PF drive motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged.
PF drive motor 2 Replace the PF drive motor 2.
PF main PWB Replace the PF main PWB..

Code: 2620

Description: PF drive motor 3 error (PF3) During the motor drive, the stable signal is not turned on for continuous 5 s.
Remedy: Defective connector cable or poor contact in the connector 1. Reinsert the connector. 2. Check continuity within the connector wire. If none, replace the wire. PF drive motor 3 and PF3 main PWB (YC6)
Drive transmission system for the PF drive motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged.
PF drive motor 3 Replace the PF drive motor 3.
PF main PWB Replace the PF main PWB..

Code: 2760

Description: Primary transfer belt motor startup error After the motor starting, the stable signal is not turned ON within 3 s.
Remedy: Primary transfer unit 1. Check that the belt can be rotated by hand, and if it is locked, get rid of the factor. 2. Replace the primary transfer unit.
Defective connector cable or poor contact in the connector 1. Reconnect the connector if its connection is loose. 2. Check continuity within the connector wire. If none, replace the wire. Primary transfer motor and Engine relay PWB (YC14) Engine relay PWB (YC1) and Main/Engine PWB (YC4)
Drive transmission system for the Primary transfer motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged.
Primary transfer motor Replace the Primary transfer motor.
Engine relay PWB Replace the engine relay PWB.
Main/Engine PWB Replace the Main/Engine PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie