Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera ECOSYS P7035cdn — Trang 7/9

Code: 7004

Description: Toner motor Y error
When the toner motor Y is driven, the toner motor Y over-current detection signal is detected continuously for 50 times (5 s) at 100 ms intervals.
Causes: Defective harness between toner motor Y and engine PWB (YC23), or improper connector insertion. Defective drive transmission system of the toner motor Y. Defective toner motor Y. Defective engine PWB.
Remedy: Defective harness between toner motor Y and engine PWB (YC23), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective drive transmission system of the toner motor Y. Check if the gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective toner motor Y. Replace the toner motor Y.
Defective engine PWB. Replace the engine PWB.

Code: 7401

Description: Developing unit K non-installing error
The EEPROM of the developing PWB K does not communicate normally. Incompatible developing unit K is installed.
Causes: Faulty connection of the connector between the developing PWB K and drum relay PWB. Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Installation of incompatible developing unit K. Defective toner sensor K. Defective engine PWB.
Remedy: Faulty connection of the connector between the developing PWB K and drum relay PWB. Check the installation of the developing unit K and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible developing unit K. Install developing unit K compatible with the specifications to the printer.
Defective toner sensor K. Replace the developing unit K.
Defective engine PWB. Replace the engine PWB.

Code: 7402

Description: Developing unit C non-installing error
The EEPROM of the developing PWB C does not communicate normally. Incompatible developing unit C is installed.
Causes: Faulty connection of the connector between the developing PWB C and drum relay PWB. Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Installation of incompatible developing unit C. Defective toner sensor C. Defective engine PWB.
Remedy: Faulty connection of the connector between the developing PWB C and drum relay PWB. Check the installation of the developing unit C and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible developing unit C. Install developing unit C compatible with the specifications to the printer.
Defective toner sensor C. Replace the developing unit C.
Defective engine PWB. Replace the engine PWB.

Code: 7403

Description: Developing unit M non-installing error
The EEPROM of the developing PWB M does not communicate normally. Incompatible developing unit M is installed.
Causes: Faulty connection of the connector between the developing PWB M and drum relay PWB. Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Installation of incompatible developing unit M. Defective toner sensor M. Defective engine PWB.
Remedy: Faulty connection of the connector between the developing PWB M and drum relay PWB. Check the installation of the developing unit M and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible developing unit M. Install developing unit M compatible with the specifications to the printer.
Defective toner sensor M. Replace the developing unit M.
Defective engine PWB. Replace the engine PWB.

Code: 7404

Description: Developing unit Y non-installing error
The EEPROM of the developing PWB Y does not communicate normally. Incompatible developing unit Y is installed.
Causes: Faulty connection of the connector between the developing PWB Y and drum relay PWB. Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Installation of incompatible developing unit Y. Defective toner sensor Y. Defective engine PWB.
Remedy: Faulty connection of the connector between the developing PWB Y and drum relay PWB. Check the installation of the developing unit Y and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC2) and engine PWB (YC619), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible developing unit Y. Install developing unit Y compatible with the specifications to the printer.
Defective toner sensor Y. Replace the developing unit Y.
Defective engine PWB. Replace the engine PWB.

Code: 7411

Description: Drum unit K non-installing error
The EEPROM of drum PWB K does not communicate normally. Incompatible drum unit K is installed.
Causes: Faulty connection of the connector between the drum PWB K and drum relay PWB. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Installation of incompatible drum unit K. Defective drum PWB K. Defective engine PWB.
Remedy: Faulty connection of the connector between the drum PWB K and drum relay PWB. Check the installation of the developing unit K and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible drum unit K. Install drum unit K compatible with the specifications to the printer.
Defective drum PWB K. Replace the drum unit Y.
Defective engine PWB. Replace the engine PWB.

Code: 7412

Description: Drum unit C non-installing error
The EEPROM of drum PWB C does not communicate normally. Incompatible drum unit C is installed.
Causes: Faulty connection of the connector between the drum PWB C and drum relay PWB. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Installation of incompatible drum unit C. Defective drum PWB C. Defective engine PWB.
Remedy: Faulty connection of the connector between the drum PWB C and drum relay PWB. Check the installation of the developing unit C and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible drum unit C. Install drum unit C compatible with the specifications to the printer.
Defective drum PWB C. Replace the drum unit C.
Defective engine PWB. Replace the engine PWB.

Code: 7413

Description: Drum unit M non-installing error
The EEPROM of drum PWB M does not communicate normally. Incompatible drum unit M is installed.
Causes: Faulty connection of the connector between the drum PWB M and drum relay PWB. Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Installation of incompatible drum unit M. Defective drum PWB M. Defective engine PWB.
Remedy: Faulty connection of the connector between the drum PWB M and drum relay PWB. Check the installation of the developing unit M and drum relay PWB and reinstall them if necessary.
Defective harness between drum relay PWB (YC1) and engine PWB (YC34), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Installation of incompatible drum unit M. Install drum unit M compatible with the specifications to the printer.
Defective drum PWB M. Replace the drum unit M.
Defective engine PWB. Replace the engine PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie