Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS1350DN

Code: 0100

Description: Backup memory device error
Causes: Defective flash memory (U10). Defective control PWB.
Remedy: Defective flash memory (U10). Replace the control PWB.
Defective control PWB. Replace the control PWB.

Code: 0110

Description: Backup memory data error
Causes: Defective flash memory (U10). Defective control PWB.
Remedy: Defective flash memory (U10). Replace the control PWB.
Defective control PWB. Replace the control PWB.

Code: 0120

Description: MAC address data error
Causes: Defective flash memory (U10).
Remedy: Replace the control PWB.

Code: 0150

Description: Control PWB EEPROM error
Detecting control PWB EEPROM (U300) communication error.
Causes: Improper installation control PWB EEPROM (U300). Defective control PWB.
Remedy: Improper installation control PWB EEPROM (U300). Check the installation of the EEPROM (U300) and remedy if necessary.
Defective control PWB. Replace the control PWB.

Code: 0170

Description: Billing counting error
Causes: Defective control PWB.
Remedy: Replace the control PWB.

Code: 0420

Description: Paper feeder communication error
Communication error between control PWB and optional paper feeder.
Causes: Improper installation paper feeder. Defective harness between control PWB (YC318) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main- PWB.
Remedy: Improper installation paper feeder. Follow installation instruction carefully again.
Defective harness between control PWB (YC318) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective control PWB. Replace the control PWB.
Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective PF main- PWB. Replace the PF main PWB.

Code: 2000

Description: Main motor error
The main motor ready input is not given for 2 s during the main motor is ON.
Causes: Defective harness between main motor (CN1) and control PWB (YC305), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective main motor.
Remedy: Defective harness between main motor (CN1) and control PWB (YC305), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective drive transmission system of the main motor. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any.
Defective main motor. Replace the main motor.
Defective control PWB. Replace the control PWB.

Code: 4000

Description: Polygon motor (laser scanner unit) error
The polygon motor ready input is not given for 6 s during the polygon motor is ON.
Causes: Defective harness between polygon motor and control PWB (YC319), or improper connector insertion. Defective laser scanner unit. Defective control PWB.
Remedy: Defective harness between polygon motor and control PWB (YC319), or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness.
Defective laser scanner unit. Replace the laser scanner unit.
Defective control PWB. Replace the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie