Danh mục sản phẩm

Code :

Code: E1
Display: Call service person E1
Description: Main Motor Error. The pulse signal is not detected.

Code: E4
Display: Call service person E4
Description: Fuser Heater Error.

Code: E5
Display: Call service person E5
Description: Eraser Error. The eraser current is less than 15mA (normally 65 mA).

Code: E6
Display: Call service person E6
Description: Engine ROM check sum error.

Code: E9
Display: Call service person E9
Description: Toner Motor Error. The toner motor current is 120 mA or more for one second (normally 30 mA).

Code: EE ... EF
Display: Call service person EE/EF
Description: Drum Heater Error/Total Page Counter Error.

Code: F1
Display: Call service person F1
Description: System Checksum Error. An error is detected in the controller. The Ready-symbol and ON LINE indicators go off; and ATTENTION lights. The printer does not operate when this message is displayed.

Code: F2
Display: Call service person F2
Description: Main RAM Error.

< 1 2 3

0