Mã lỗi Kyocera FS1750
Code:
E0
Display: E0 - Communication error
Description: Communication between the engine controller and the main controller is failed.
Code:
E1
Display: E1 - Main motor error
Description: The main motor is overtorqued.
Code:
E2
Display: E2 - Laser scanner motor error
Description: The polygon motor does not deliver a synchronous output (L) within the predetermined period of time.
Code:
E3
Display: E3 - Laser beam detection error
Description: Beam detection is failed. The photo detector board does not deliver a synchronous output (L).
Code:
E4
Display: E4 - Fuser heater error
Description: The fuser heater is not intact due to disconnection or the circuit failure.
Code:
E5
Display: E5 - Eraser error
Description: The eraser is blown out or the power supply does not reach to the eraser.
Code:
E6
Display: E6 - Flash ROM errorr
Description: Checksum is erroneous with the flash ROM.
Code:
E9
Display: E9 - Toner motor errorwi
Description: The toner motor is overtorqued.