Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS1800 plus — Trang 2/3

Code: C4

Description: Option sorter SO-60 communication error
Communication error between engine board and option sorter SO-60.
Causes: • Defective gate array U204 on the engine board (KP-864). • Blown-out fuse (F202) on the engine board. • Improper installation between printer and option sorters. • Improper connector insertion. • Defective main board (KP-777/KP-858). • Defective option sorter SO-60.

Code: C7

Description: Option bulk paper stacker HS-8E communication error
Communication error between engine board and option bulk paper stacker HS-8E.
Causes: • Defective gate array U204 on the engine board (KP-864). • Blown-out fuse (F202) on the engine board. • Improper installation between printer and option bulk paper stackers. • Defective harness (S02400) between engine board and option unit interface connector. • Improper connector insertion. • Defective option bulk paper stacker.

Code: CE

Description: Option bulk paper feeder PF-8E motor error
Motor error in the option bulk paper feeder PF-8E.
Causes: • Defective harness (S02400) between engine board and option unit interface connector. • Defective option bulk paper feeder.

Code: CF

Description: Option bulk paper stacker HS-8E motor error
Motor error in the option bulk paper stacker HS-8E.
Causes: • Defective harness (S02400) between engine board and option unit interface connector. • Defective option bulk paper stacker HS-8E.

Code: E0

Description: Communication erroron error
Communication between the engine board and the main board is failed.
Causes: • Defective gate array (U02) on the main board. • Connector failure between the engine board (KP-864) and main board (KP-777/KP- 858). • Overrun in the engine system, deactivating the program flash ROM (U202) on the engine board (KP-864).

Code: E1

Description: Main motor error
The main motor is overloaded.
Causes: • Overcurrent in the main motor circuitry due to an excessive torque. • Connector insertion error. • Defective gate array U204 on the engine board (KP-864). • Defective harness between engine board and engine relay board (KP-760). • Defective harness between engine relay board (KP-760) and main motor.

Code: E2

Description: Laser scanner unit (Polygon motor) error
POLRDY does not go low within 20 seconds after POLON* goes low (When starting) or within 16 seconds after REGPAP signal goes high (during printing).
Causes: • Defective gate array U204 on the engine board. • Defective polygon motor. • Improper connector insertion. • Defective harness between laser scanner unit and engine board.

Code: E3

Description: Laser scanner unit (Pin photo diode sensor) error
Laser beam detection failed. The pin photo diode sensor [board] (KP-746) does not deliver a horizontal synchronous signal (PD).
Causes: • No laser beam due to the laser diode defect (PD). • Soiled or defective pin photo diode sensor. • Defective gate array U204 of engine board. • Improper connector insertion. • Defective harness between engine board and laser scanner unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie