Mã lỗi Kyocera FS3400 — Trang 3/3
Code:
Tất cả lỗi (24)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
E0
E1
E4
E5
E6
E9
EE ... EF
F1
F2
Code:
E1
Display: Call service person E1
Description: Main Motor Error. The pulse signal is not detected.
Code:
E4
Display: Call service person E4
Description: Fuser Heater Error.
Code:
E5
Display: Call service person E5
Description: Eraser Error. The eraser current is less than 15mA (normally 65 mA).
Code:
E6
Display: Call service person E6
Description: Engine ROM check sum error.
Code:
E9
Display: Call service person E9
Description: Toner Motor Error. The toner motor current is 120 mA or more for one second (normally 30 mA).
Display: Call service person EE/EF
Description: Drum Heater Error/Total Page Counter Error.
Code:
F1
Display: Call service person F1
Description: System Checksum Error. An error is detected in the controller. The Ready-symbol and ON LINE indicators go off; and ATTENTION lights. The printer does not operate when this message is displayed.
Code:
F2
Display: Call service person F2
Description: Main RAM Error.