Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS3800N

Code: A0

Description: Zero cross signal error
The ZCROSS signal does not reach the engine board within 3 seconds after power on.e
Causes: • Defective power supply unit. • Defective CPU U201 on the engine board.

Code: A2

Description: Abnomal high temperature error.
CPU U201 detected that the HTEMP* signal (Abnormal temperature of more than approximately 220 °C) is low for more than 3 seconds.
Causes: • Defective CPU U201 or comparator U205 on the engine board. • Defective engine board (KP-864). • Defective thermistor. • Defective photo coupler on the power supply unit for the heater lamp.

Code: B2

Description: Option paper feeder PF-60 (Top) paper feed motor error
Paper feed motor error in the top option paper feeder.
Causes: • Defective gate array U204 on the engine board (KP-864). • Defective harness (S02400) between engine board and option unit interface connector. • Defective paper feeder PF-60.

Code: B3

Description: Option paper feeder PF-60 (Middle) paper feed motor error
Paper feed motor error in the middle option paper feeder.
Causes: • Defective gate array U204 on the engine board (KP-864). • Defective harness (S02400) between engine board and option unit interface connector. • Defective option paper feeder PF-60.

Code: B4

Description: Option paper feeder PF-60 (Bottom) paper feed motor error.
Paper feed motor error in the bottom option paper feeder.
Causes: • Defective gate array U204 on the engine board (KP-864). • Defective harness (S02400) between engine board and option unit interface connector. • Defective paper feeder PF-60.

Code: C0

Description: Option paper feeder PF-60 communication error
Communication error between engine board and option paper feeder PF-60.
Causes: • Defective gate array U204 on the engine board (KP-864). • Blown-out fuse (F202) on the engine board. • Improper installation between printer and option paper feeder. • Defective harness (S02400) between engine board and option unit interface connector. • Improper connector insertion. • Defective option paper feeder PF-60.

Code: C1

Description: Option duplexer DU-60 communication error
Communication error between engine board and option duplexer DU-60.
Causes: • Defective gate array U204 on the engine board (KP-864). • Blown-out fuse (F202) on the engine board. • Improper installation between printer and option duplexers. • Defective harness (S02400) between engine board and option unit interface connector. • Improper connector insertion. • Defective option duplexer DU-60. PF-60.

Code: C2

Description: Option duplexer DU-60 side registration error
Side registration home position error of option duplexer DU-60.
Causes: • Defective gate array U204 on the engine board (KP-864). • Improper installation between printer and option duplexer, or each option unit. • Defective harness (S02400) between engine board and option unit interface connector. • Improper connector insertion. • Defective option duplexer DU-60.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie