Description: Paper feeder PF-60 [bottom] with wrong firmware version is installed
The code that identifies the firmware version was out of range.
Causes: Wrong firmware version is used on the main board in paper feeder PF-60.
Code: 1200
Description: Optional duplexer DU-61 side registration error
Side registration home position error of optional duplexer DU-61.
Causes: Defective gate array U7 on the engine board (KP-1081). Improper installation between printer and optional duplexer, or each optional unit. Defective harness (S03022) between engine board and optional unit interface connector. Improper connector insertion. Defective optional duplexer DU-61.
Code: 2000
Description: Main motor error
The main motor is overloaded
Causes: Overcurrent in the main motor circuitry due to an excessive torque. Connector insertion error. Defective gate array U7 on the engine board (KP- 1081). Defective harness between engine board and engine relay board (KP- 1071). Defective harness between engine relay board (KP- 1071) and main motor.
Code: 2600
Description: Optional bulk paper feeder PF-8E motor error
Motor error in the optional bulk paper feeder PF-8E.
Causes: Defective harness (S03022) between engine board and optional unit interface connector. Defective optional bulk paper feeder.
Code: 2610
Description: Optional paper feeder PF-60 (Top) paper feed motor error
Paper feed motor error in the top optional paper feederpap
Causes: Defective gate array U7 on the engine board (KP- 1081). Defective harness (S03022) between engine board and optional unit interface connector. Defective paper feeder PF-60.
Code: 2620
Description: Optional paper feeder PF-60 (Middle) paper feed motor error
Paper feed motor error in the middle optional paper feeder.D
Causes: Defective gate array U7 on the engine board (KP- 1081). Defective harness (S03022) between engine board and optional unit interface connector. Defective optional paper feeder PF- 60.
Code: 2630
Description: Optional paper feeder PF-60 (bottom) paper feed motor error
Paper feed motor error in the bottom optional paper feeder.D
Causes: Defective gate array U7 on the engine board (KP- 1081). Defective harness (S03022) between engine board and optional unit interface connector. Defective paper feeder PF-60.
Code: 4000
Description: Laser scanner unit (Polygon motor) error
POLRDY* does not go low within 20 seconds after POLON* goes low (When starting) or within 16 seconds after REGPAP signal goes high (during printing).
Causes: Defective gate array U7 on the engine board. Defective polygon motor. Improper connector insertion. Defective harness between laser scanner unit and engine board.