Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS6025MFP — Trang 7/9

Code: 8350

Description: Roller motor problem (document finisher)
The roller sensor does not turn on/off within specified time of the roller motor turning on.
Causes: Defective DF main PWB.
Defective connector cable or poor contact in the connector.
Defective roller sensor.
Defective roller motor.
Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Roller motor and DF main PWB (CN20) Roller sensor and DF main PWB (CN11)
Defective roller sensor. Replace the roller sensor.
Defective roller motor. Replace the roller motor.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8360

Description: Slide motor problem (document finisher)
The slide sensor does not turn on/off within specified time of the slide motor turning on.
Causes: Defective connector cable or poor contact in the connector.
Defective slide sensor.
Defective slide motor.
Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Slide motor and DF main PWB (CN14) Slide sensor and DF main PWB (CN22)
Defective slide sensor. Replace the slide sensor.
Defective slide motor. Replace the slide motor.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8460

Description: EEPROM problem (document finisher)
Reading from or writing to EEPROM cannot be performed.
Causes: Defective EEPROM or DF main PWB.
Remedy: Replace the DF main PWB and check for correct operation.

Code: 8800

Description: Document finisher communication error
A communication error is detected 10 times in succession.
Causes: Defective connector cable or poor contact in the connector
Defective DF main PWB.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Engine PWB (YC19) and DF relay PWB (YC2) DF relay PWB (YC3) and DF main PWB (CN1)
Defective DF main PWB. Replace the DF main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 8830

Description: Bridge communication error (document finisher)
A communication error is detected 10 times in succession.
Causes: Defective connector cable or poor contact in the connector.
Defective bridge PWB.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Engine PWB (YC19) and DF relay PWB (YC2) DF relay PWB (YC4) and bridge PWB (YC5)
Defective bridge PWB. Replace the bridge PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 8990

Description: Document finisher communication error
Causes: Defective connector cable or poor contact in the connector.
Defective DF main PWB.
Defective bridge PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.
Defective bridge PWB. Replace the bridge PWB and check for correct operation.

Code: 9000

Description: Document processor communication error
A communication error is detected 10 times in succession.
Causes: Defective connector cable or poor contact in the connector.
Defective DP main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. DP main PWB and engine PWB (YC18)
Defective DP main PWB. Replace the DP main PWB and check for correct operation.

Code: 9060

Description: DP EEPROM error Read and write data does not match. Data in the specified area of the backup memory does not match the specified values.
Causes: Defective DP main PWB.
Device damage of EEPROM.
Remedy: Defective DP main PWB. Replace the DP main PWB and check for correct operation.
Device damage of EEPROM. Contact the Service Administrative Division.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie