Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FS8100DN — Trang 6/14

Code: 6400

Description: Zero-cross signal error
While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s.
Causes: Defective PWB.
Remedy: Defective PWB. Replace the engine PWB or power source PWB and check for correct operation.

Code: 7000

Description: Toner motor problem
The rated speed achievement signal won’t turn to L in 5 s since the motor is activated. The rated speed achievement signal turns to H every other 5 s after the machine is stabilized.
Causes: Poor contact in the connector terminals. Broken the gear. Defective toner motor M/C/Y/BK. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC30 on the engine PWB and the connector on the toner motor, and the continuity across the connector terminals. Repair or replace if necessary.
Broken the gear. Check visually and replace the gear if necessary.
Defective toner motor M/C/Y/BK. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7101

Description: Toner sensor BK problem
Sensor output value of 78 or less or 944 or more continued for 3 s.й;
Causes: Defective developing unit BK. Defective engine PWB.
Remedy: Defective developing unit BK. Replace the developing unit BK.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7102

Description: Toner sensor C problem
Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit C. Defective engine PWB.
Remedy: Defective developing unit C. Replace the developing unit C.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7103

Description: Toner sensor M problem
Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit M. Defective engine PWB.
Remedy: Defective developing unit M. Replace the developing unit M.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7104

Description: Toner sensor Y problem
Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit Y. Defective engine PWB.
Remedy: Defective developing unit Y. Replace the developing unit Y.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7200

Description: Broken internal thermistor wire
An abnormal value is detected in the input data to inner temperature sensor 1.
Causes: Poor contact in the connector terminals. Defective laser scanner unit. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary.
Defective laser scanner unit. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7210

Description: Short-circuited internal thermistor
An abnormal value is detected in the input data to inner temperature sensor 1.
Causes: Poor contact in the connector terminals. Defective laser scanner unit. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary.
Defective laser scanner unit. Replace the laser scanner unit.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie