Mã lỗi Kyocera FSC1020MFP — Trang 4/4
Code:
Tất cả lỗi (31)
195
202
203
204
220
222
240
300
396
397
445
480
490
500
530
531
541
542
543
545
547
548
557
559
669
690
819
823
824
827
828
Description: EEPROM Error
An unexpected value exists in the initialization flag of the EEPROM
Causes: EEPROM not initialized. Defective EEPROM 1. Initialize the EEPROM. 2. Replace the EEPROM. 3. Replace the EGB.
Description: GAVD Communication Error
The ID of the GAVD is not identified during initialization. The chip ID of the GAVD cannot be detected by the machine at power-on.
Causes: Defective EGB 1. Replace the EGB.
Description: Service Cycle Power
Incorrect combination of EGB and controller board. An unexpected error occurs in the EEPROM on the controller board.
Causes: Controller board defective 1. Install the correct EGB and controller boards for this machine. 2. Replace the controller board
Description: USB/ Network Device Error
An interface error in the USB connection or NIB connection occurs.
Causes: Controller board detective 1. Replace the controller board.
Description: EEPROM Error
An EEPROM check error at power-on occurs.
Causes: Controller board detective 1. Replace the controller board.
Description: On-Board Memory Check Error
An on-board memory check error at power-on occurs.
Causes: Controller board detective 1. Replace the controller board.
Description: ROM Checksum Error
A ROM checksum error at power-on occurs.
Causes: 1. Replace the controller board.