Description: FAX control PWB incompatible detection error In the initial communication with the FAX control PWB, the normal communication command is not transmitted.
Causes: Defective FAX software. Defective FAX control PWB.
Remedy: Defective FAX software. Install the fax software. Defective FAX control PWB. Replace the fax control PWB and check for correct operation.
Remedy: Defective flash memory. Replace the main PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation.
Causes: The engine PWB EEPROM was improperly installed. Defective engine PWB. Defective EEPROM.
Remedy: The engine PWB EEPROM was improperly installed. Check the EEPROM is properly installed and remedy if necessary. Defective engine PWB. Replace the engine PWB and check for correct operation. Defective EEPROM. Contact the Service Administrative Division.