Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera FSC8525MFP — Trang 14/15

Code: 8210

Description: Stapler problem (document finisher)
Jam 7012 or 7023 is indicated.
Causes: Defective connector cable of staple or poor contact in the connector. The stapler is blocked with a staple. The stapler is broken. Defective DF main PWB.
Remedy: Defective connector cable of staple or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable.
The stapler is blocked with a staple. Remove the stapler cartridge, and check the cartridge and the stapling section of the stapler.
The stapler is broken. Replace the stapler and check for correct operation.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8320

Description: Adjustment motor 2 problem (document finisher)
The adjustment sensor 2 does not turn on/off within specified time of the adjustment motor 2 turning on.
Causes: Defective connector cable or poor contact in the connector. Defective adjustment sensor 2. Defective adjustment motor 2. Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Adjustment motor 2 and DF main PWB (CN18) Adjustment sensor 2 and DF main PWB (CN7)
Defective adjustment sensor 2. Replace the adjustment sensor 2.
Defective adjustment motor 2. Replace the adjustment motor 2.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8330

Description: Adjustment motor 1 problem (document finisher)
The adjustment sensor 1 does not turn on/off within specified time of the adjustment motor 1 turning on.
Causes: Defective connector cable or poor contact in the connector. Defective adjustment sensor 1. Defective adjustment motor 1. Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Adjustment motor 1 and DF main PWB (CN18) Adjustment sensor 1 and DF main PWB (CN7)
Defective adjustment sensor 1. Replace the adjustment sensor 1.
Defective adjustment motor 1. Replace the adjustment motor 1.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8350

Description: Roller motor problem (document finisher) The roller sensor does not turn on/off within specified time of the roller motor turning on.
Causes: Defective connector cable or poor contact in the connector. Defective roller sensor. Defective roller motor. Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Roller motor and DF main PWB (CN20) Roller sensor and DF main PWB (CN11)
Defective roller sensor. Replace the roller sensor.
Defective roller motor. Replace the roller motor.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8360

Description: Slide motor problem (document finisher)
The slide sensor does not turn on/off within specified time of the slide motor turning on.
Causes: Defective connector cable or poor contact in the connector. Defective slide sensor. Defective slide motor. Defective DF main PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Slide motor and DF main PWB (CN14) Slide sensor and DF main PWB (CN22)
Defective slide sensor. Replace the slide sensor.
Defective slide motor. Replace the slide motor.
Defective DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8460

Description: EEPROM problem (document finisher)
Reading from or writing to EEPROM cannot be performed.
Causes: Defective EEPROM or DF main PWB.
Remedy: Defective EEPROM or DF main PWB. Replace the DF main PWB and check for correct operation.

Code: 8800

Description: Document finisher communication error
A communication error is detected 10 times in succession.
Causes: Defective connector cable or poor contact in the connector. Defective DF main PWB. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Engine PWB (YC19) and DF relay PWB (YC2) DF relay PWB (YC3) and DF main PWB (CN1)
Defective DF main PWB. Replace the DF main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 8830

Description: Bridge communication error (document finisher)
A communication error is detected 10 times in succession.
Causes: Defective connector cable or poor contact in the connector. Defective bridge PWB. Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Engine PWB (YC19) and DF relay PWB (YC2) DF relay PWB (YC4) and bridge PWB (YC5)
Defective bridge PWB. Replace the bridge PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie