Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM1500

Code: C0100

Description: Backup memory read/write problem (main board (KP-5060))
• Read and write data does not match.
Causes: Defective backup RAM or main board (KP-5060).
Remedy: Replace the main board (KP-5060) and check for correct operation.

Code: C0110

Description: Backup memory data problem (main board (KP-5060))
• Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data. Defective backup RAM.
Remedy: Turn interlock switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0110 is displayed after re-setting the backup memory contents, replace the backup RAM or main board (KP-5060).

Code: C0150

Description: Backup memory read/write problem (engine board (KP-5061))
• Read and write data does not match.
Causes: Defective backup RAM or engine board (KP-5061).
Remedy: Replace the engine board (KP-5061) and check for correct operation.

Code: C0160

Description: Backup memory data problem (engine board (KP-5061))
• Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data. Defective backup RAM.
Remedy: Turn interlock switch off and back on and run maintenance item U020 to set the contents of the backup memory data again. If the C0160 is displayed after re-setting the backup memory contents, replace the backup RAM or engine board (KP-5061).

Code: C0170

Description: Accounting count problem
• When the power is turned on, the total count and the scan count are abnormal both on the main board (KP- 5060) and the engine board (KP-5061).
Causes: Defective main board (KP-5060) or engine board (KP-5061).
Remedy: Replace the main board (KP-5060) or engine board (KP-5061) and check for correct operation.

Code: C0180

Description: Machine number mismatch
• When the power is turned on, the machine number does not match between the main board (KP-5060) and the engine board (KP-5061).
Causes: Defective main board (KP-5060) or engine board (KP-5061).
Remedy: Replace the main board (KP-5060) or engine board (KP-5061) and check for correct operation.

Code: C0210

Description: Communication problem between the main board (KP-5060) and engine board (KP-5061)
• When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for three seconds.
Causes: Poor contact in the connector terminals. Defective main board (KP-5060) or engine board (KP-5061).
Remedy: Check the connection of connectors YC3 on the main board (KP-5060) and YC3 on the engine board (KP-5061), and the continuity across the connector terminals. Repair or replace if necessary. Replace the main board (KP-5060) or engine board (KP-5061) and check for correct operation.

Code: C0610

Description: Bitmap (DIMM) problem
• There is a problem with the data or address bus of the bitmap DRAM.
Causes: Defective main board (KP-5060). DIMM installed incorrectly. Defective DIMM
Remedy: Replace the main board (KP-5060) and check for correct operation. Check if the DIMM is inserted into the socket on the main board (KP-5060) correctly. Replace the DIMM and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie