Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM3040

Code: C0030

Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.
Causes: Defective fax control PWB.
Remedy: Defective fax control PWB. Replace the fax control PWB and verify the operation.

Code: C0060

Description: Main PWB type mismatch error
Causes: Defective PWB.
Remedy: Defective PWB. Run maintenance item U935 to contact the Service Administrative Division.

Code: C0070

Description: Abnormal detection of fax control PWB incompatibility (optional fax) In the initial communication with the fax control PWB, any normal communication command is not transmitted.
Causes: Defective fax software. Defective fax control PWB.
Remedy: Defective fax software. Install the fax software.
Defective fax control PWB. Replace the fax control PWB and verify the operation.

Code: C0100

Description: Main PWB backup memory device problem Writing or erasing has not completed even after a certain time.
Causes: Defective main PWB.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.

Code: C0110

Description: Backup memory data problem Data in the specified area of the backup memory does not match the specified values.
Causes: Problem with the backup memory data.
Remedy: Problem with the backup memory data. Run maintenance item U020 to initialize the backup memory data.

Code: C0120

Description: Drum EEPROM error Reading from or writing to EEPROM cannot be performed.
Causes: Poor contact in the connector terminals. Defective drum unit.
Remedy: Poor contact in the connector terminals. Check the connection of connector on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary.
Defective drum unit. Replace the drum unit.

Code: C0130

Description: Backup memory (EEPROM) device problem (Main PWB) Reading from or writing to EEPROM cannot be performed.
Causes: Defective main PWB. Device damage of EEPROM.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.
Device damage of EEPROM. Contact the Service Administrative Division.

Code: C0140

Description: Backup memory (EEPROM) data problem (Main PWB) Reading data from EEPROM is abnormal.
Causes: Data damage of EEPROM.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie