Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM4050 — Trang 2/14

Code: C0180

Description: Machine number mismatch error Machine number of main PWB and engine PWB does not match.
Causes: Data damage of EEPROM.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.

Code: C0600

Description: DIMM installed incorrectly DIMM is not installed correctly.
Causes: DIMM installed incorrectly.
Remedy: DIMM installed incorrectly. Check if the DIMM is inserted into the socket on the main PWB correctly.

Code: C0610

Description: DIMM problem The DIMM on the main PWB does not operate correctly.
Causes: Defective main PWB.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation. Defective DIMM. Replace the DIMM and check for correct operation.

Code: C0630

Description: DMA problem DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time.
Causes: Defective DIMM. Defective main PWB.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.

Code: C0640

Description: Hard disk drive problem The hard disk cannot be accessed.
Causes: Poor contact in the connector terminals. Defective hard disk. Defective main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC49 on the main PWB and the connector on the hard disk. Repair or replace if necessary. Defective hard disk. Run U024 (HDD formatting) without turning the power off to initialize the hard disk. Replace the hard disk drive and check for correct operation if the problem is still detected after initialization. Defective main PWB. Replace the main PWB and check for correct operation.

Code: C0700

Description: CF error for backup Optional fax backup kit (CF) is not suitable as backup.
Causes: CF installed incorrectly. Defective CF.
Remedy: CF installed incorrectly. Install CF correctly. Defective CF. Run the maintenance item U933 to initialize the CF.

Code: C0800

Description: Image processing problem JAM05 is detected twice.
Causes: Defective main PWB.
Remedy: Defective main PWB. Replace the main PWB and check for correct operation.

Code: C0830

Description: Flash ROM program area checksum error (optional fax) A checksum error occurred with the program in the Flash ROM on the fax control PWB.
Causes: Defective fax control PWB.
Remedy: Defective fax control PWB. Upgrade the fax control PWB software. If the problem still remains, replace the fax control PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie