0

Các lỗi thường gặp

Code :
  • Code: E080
  • Description: Density Sensor Error
  • Causes: The default output of Density Sensor reaches less than 0.1V or more than 1.3V.
  • Remedy: Wires 1 Is the wire between Toner Density Sensor and PW11620 PCB connected properly? No Connect it properly. Density Sensor (PH11) 2 Can you fix the problem if you replace Density Sensor? Yes OK PW11620 PCB 3 Can you fix the problem if you replace PW11620 PCB? No OK
  • Code: E081
  • Description: Density Sensor Output Error
  • Causes: The gap between the default output and the standard output of Density Sensor reaches less than 2V.
  • Remedy: Wires 1 Is the wire between Toner Density Sensor and PW11620 PCB connected properly? No Connect it properly. Density Sensor (PH11) 2 Can you fix the problem if you replace Density Sensor? Yes OK PW11620 PCB 3 Can you fix the problem if you replace PW11620 PCB? No OK
 < 1 2 3
Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền:

Danh mục