Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KM6230 — Trang 7/9

Code: C822

Description: Finisher rear stapler problem • The rear stapler home position sensor does not change state from non-detection to detection within 0.2 s of the start of rear stapler motor counterclockwise (forward) rotation. • During initialization, the rear stapler home position sensor does not change state from non-detection to detection within 0.6 s of the start of rear stapler motor clockwise (reverse) rotation.
Causes: The rear stapler connector makes poor contact. The rear stapler malfunctions. a) The rear stapler is blocked with a staple. b) The rear stapler is broken. Defective finisher main PCB.
Remedy: Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. a) Remove the rear stapler cartridge, and check the cartridge and the stapling section of the stapler. b) Replace the rear stapler and check for correct operation. Replace the finisher main PCB and check for correct operation.

Code: C830

Description: Booklet stitcher shutter unit error
Causes: A shutter unit error is detected.
Remedy: See the booklet stitcher service manual.

Code: C831

Description: Booklet stitcher paper ejection motor problem
Causes: A problem is detected with the paper ejection motor.
Remedy: See the booklet stitcher service manual.

Code: C832

Description: Booklet stitcher elevation motor problem
Causes: A problem is detected with the elevation motor.
Remedy: See the booklet stitcher service manual.

Code: C833

Description: Booklet stitcher jog motor problem
Causes: A problem is detected with the jog motor.
Remedy: See the booklet stitcher service manual.

Code: C834

Description: Booklet stitcher staple motor problem
Causes: A problem is detected with the staple motor.
Remedy: See the booklet stitcher service manual.

Code: C835

Description: Booklet stitcher stapler unit shift motor problem
Causes: A problem is detected with the stapler unit shift motor.
Remedy: See the booklet stitcher service manual.

Code: C836

Description: Booklet stitcher stack level detection sensor problem
Causes: A problem is detected with the stack level detection sensor.
Remedy: See the booklet stitcher service manual.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie