Description: Toner motor C error • After the toner motor C drive signal is turned on, the toner motor C overcurrent detection signal is detected continuously for 180 x 50 ms.
Causes: Defective toner motor C. Defective engine controller PWB.
Remedy: Defective toner motor C. Replace the toner motor C. Defective engine controller PWB. Replace the engine controller PWB.
Description: Toner motor M error • After the toner motor M drive signal is turned on, the toner motor M overcurrent detection signal is detected continuously for 180 x 50 ms.
Causes: Defective toner motor M. Defective engine controller PWB.
Remedy: Defective toner motor M. Replace the toner motor M. Defective engine controller PWB. Replace the engine controller PWB.
Description: Toner motor Y error • After the toner motor Y drive signal is turned on, the toner motor Y overcurrent detection signal is detected continuously for 180 x 50 ms.
Causes: Defective toner motor Y. Defective engine controller PWB.
Remedy: Defective toner motor Y. Replace the toner motor Y. Defective engine controller PWB. Replace the engine controller PWB.
Description: Broken internal thermistor wire • The value of input from the internal thermistor 4.5 V or more is detected.
Causes: Poor contact in the connector terminals. Defective engine controller PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC39 on the engine controller PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective engine controller PWB. Replace the engine controller PWB.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.