Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera KMC3232 — Trang 10/17

Code: C6120

Description: Abnormally high fuser thermistor 2 temperature The fuser temperature exceeds 190 C/ 374 F.
Causes: Installation defectiveness on fuser thermistor 2. Defective PWB.
Remedy: Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞Ω, replace the fuser unit. Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6130

Description: Fuser thermistor 2 break error Fuser thermistor 2 detected less than 40 C/104 F during driving. When the difference of temperature of fuser thermistor 1 and 3 becomes 100 C/212 F or more.
Causes: Installation defectiveness on fuser thermistor 2. Defective fuser heater 3. Defective PWB.
Remedy: Installation defectiveness on fuser thermistor 2. Measure the resistance. If it is ∞Ω, replace the fuser unit. Defective fuser heater 3. Check for continuity across each heater. If none, replace the fuser unit. Defective PWB. Replace the power source PWB or engine PWB and check for correct operation.

Code: C6400

Description: Zero-cross signal error While fuser heater ON/OFF control is performed, the zero-cross signal is not input within 3 s.
Causes: Defective PWB.
Remedy: Defective PWB. Replace the engine PWB or power source PWB and check for correct operation.

Code: C7000

Description: Toner motor problem The rated speed achievement signal won’t turn to L in 5 s since the motor is activated. The rated speed achievement signal turns to H every other 5 s after the machine is stabilized.
Causes: Poor contact in the connector terminals. Broken the gear. Defective toner motor M/C/Y/BK. Defective engine PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC30 on the engine PWB and the connector on the toner motor, and the continuity across the connector terminals. Repair or replace if necessary. Broken the gear. Check visually and replace the gear if necessary. Defective toner motor M/C/Y/BK. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor. Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: C7101

Description: Toner sensor BK problem Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit BK. Defective engine PWB.
Remedy: Defective developing unit BK. Replace the developing unit BK. Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: C7102

Description: Toner sensor C problem Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit C. Defective engine PWB.
Remedy: Defective developing unit C. Replace the developing unit C. Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: C7103

Description: Toner sensor M problem Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit M. Defective engine PWB.
Remedy: Defective developing unit M. Replace the developing unit M. Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: C7104

Description: Toner sensor Y problem Sensor output value of 78 or less or 944 or more continued for 3 s.
Causes: Defective developing unit Y. Defective engine PWB.
Remedy: Defective developing unit Y. Replace the developing unit Y. Defective engine PWB. Replace the engine PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie