Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 250ci — Trang 20/21

Code: C8900

Description: Backup memory data problem (optional 3000-sheet document finisher)
Read and write data does not match 3 times in succession.
Causes: Poor contact in the connector terminals.
EEPROM installed incorrectly.
Defective finisher main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector on the finisher main PWB and the connector of the machine, and the continuity across the connector terminals. Repair or replace if necessary.
EEPROM installed incorrectly. Install EEPROM correctly.
Defective finisher main PWB. Replace the finisher main PWB and check for correct operation.

Code: C8910

Description: Backup memory data problem (optional of 3000-sheet document finisher)
Read and write data does not match 3 times in succession.
Causes: Poor contact in the connector terminals
Defective punch PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector on the punch PWB and the connector YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective punch PWB. Replace the punch PWB and check for correct operation.

Code: C8930

Description: Backup memory data problem (optional center-folding unit of 3000sheet document finisher)
Read and write data does not match 3 times in succession.
Causes: Poor contact in the connector terminals
EEPROM installed incorrectly.
Defective centerfold main PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector on the centerfold main PWB and the connector YC5 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary.
EEPROM installed incorrectly. Install EEPROM correctly.
Defective centerfold main PWB. Replace the centerfold main PWB and check for correct operation.

Code: C9000

Description: DP communication problem (optional DP)
A communication error is detected.
Causes: Poor contact in the connector terminals.
Defective PWB.
Remedy: Poor contact in the connector terminals. Check the connection of connector YC6 on the ISM PWB and the connector of the DP, and the continuity across the connector terminals. Repair or replace if necessary.
Defective PWB. Replace the DP driver PWB or ISM PWB and check for correct operation.

Code: C9040

Description: DP lift motor going up error (optional DP)
The tray upper limit switch does not turn on within 2 s of DP lift motor turning on.
Causes: Loose connection of the DP lift motor connector.
Malfunction of the DP lift motor.
Loose connection of the tray upper limit switch connector.
Malfunction of the tray upper limit switch.
Defective DP driver PWB.
Remedy: Loose connection of the DP lift motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the DP lift motor. Replace the DP lift motor and check for correct operation.
Loose connection of the tray upper limit switch connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the tray upper limit switch. Replace the tray upper limit switch and check for correct operation.
Defective DP driver PWB. Replace the DP driver PWB and check for correct operation.

Code: C9050

Description: DP lift motor going down error (optional DP)
The tray lower limit switch does not turn on within 2 s of DP lift motor turning on.
Causes: Loose connection of the DP lift motor connector.
Malfunction of the DP lift motor.
Loose connection of the tray lower limit switch connector.
Malfunction of the tray lower limit switch.
Defective DP driver PWB.
Remedy: Loose connection of the DP lift motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the DP lift motor. Replace the DP lift motor and check for correct operation.
Loose connection of the tray lower limit switch connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Malfunction of the tray lower limit switch. Replace the tray lower limit switch and check for correct operation.
Defective DP driver PWB. Replace the DP driver PWB and check for correct operation.

Code: C9060

Description: DP EEPROM error (optional DP)
Read and write data does not match. Data in the specified area of the backup memory does not match the specified values.
Causes: Defective DP main PWB.
Device damage of EEPROM.
Remedy: Defective DP main PWB. Replace the DP main PWB and check for correct operation.
Device damage of EEPROM. Contact the Service Administrative Division.

Code: C9070

Description: Communication problem between DP and SHD (optional DP)
A communication error is detected.
Causes: Loose connection of the SHD PWB.
Defective SHD PWB.
Remedy: Loose connection of the SHD PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable.
Defective SHD PWB. Replace the SHD PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie