Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 305 — Trang 2/9

Code: 0160

Description: Backup memory data error (engine PWB)
Causes: Defective flash memory.
Defective engine PWB.
Remedy: Replace the engine PWB and check for correct operation.

Code: 0170

Description: Billing counting error
A checksum error is detected in the main and engine backup memories for the billing counters.
Causes: Data damage of EEPROM.
Defective PWB.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.
Defective PWB. Replace the main PWB or the engine PWB and check for correct operation.

Code: 0180

Description: Machine number mismatch
Machine number of main and engine does not match.
Causes: Data damage of EEPROM.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.

Code: 0320

Description: I/O CPU communication error
A communication error is detected 10 times in succession.
Causes: Defective PWB.
Remedy: Defective PWB. Replace the main PWB or the engine PWB and check for correct operation.(see page 1- 5-33,1-5-34)

Code: 0800

Description: Image processing error
JAM05 is detected twice.
Causes: Defective main PWB.
Remedy: Replace the main PWB and check for correct operation(see page 1-5-33).

Code: 0830

Description: FAX control PWB flash program area checksum error
A checksum error occurred with the program of the FAX control PWB.
Causes: Defective FAX software.
Defective FAX control PWB.
Remedy: Defective FAX software. Install the fax software.
Defective FAX control PWB. Replace the FAX control PWB.

Code: 0840

Description: Faults of RTC
The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed.
Causes: The battery is disconnected from the main PWB.
Defective main PWB.
Remedy: The battery is disconnected from the main PWB. Check visually and remedy if necessary
Defective main PWB. Replace the main PWB and check for correct operation.

Code: 0870

Description: FAX control PWB to main PWB high capacity data transfer error
High-capacity data transfer between the FAX control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified times.
Causes: Improper installation FAX control PWB.
Defective FAX control PWB or main PWB.
Remedy: Improper installation FAX control PWB. Reinstall the FAX control PWB.
Defective FAX control PWB or main PWB. Replace the FAX control PWB or main PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie