Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 3550ci — Trang 21/31

Code: 7253

Description: Short-circuited developer thermistor M
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector
Defective developer thermistor M.
Defective engine PWB
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor M. Replace developer unit M.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7254

Description: Short-circuited developer thermistor Y wire
The sensor input sampling is less than 69.
Causes: Defective connector cable or poor contact in the connector.
Defective developer thermistor Y.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10)
Defective developer thermistor Y. Replace developer unit Y.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7401

Description: Developer unit K type mismatch error
Absence of the developer unit K is detected.
Causes: Defective connector cable or poor contact in the connector.
Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit K and front PWB (YC9) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7402

Description: Developer unit C type mismatch error
Absence of the developer unit C is detected.
Causes: Defective connector cable or poor contact in the connector.
Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit C and front PWB (YC13) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7403

Description: Developer unit M type mismatch error
Absence of the developer unit M is detected.
Causes: Defective connector cable or poor contact in the connector
Different type of the developer unit is installed
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7404

Description: Developer unit Y type mismatch error
Absence of the developer unit Y is detected.
Causes: Defective connector cable or poor contact in the connector.
Different type of the developer unit is installed.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10)
Different type of the developer unit is installed. Install the correct developer unit.

Code: 7601

Description: ID sensor 1 error
An abnormal value is detected in the input data to ID sensor 1.
Causes: Defective connector cable or poor contact in the connector
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. ID sensor 1 and feed PWB 1 (YC10) Feed PWB 1 (YC1) and engine PWB (YC6)
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 7602

Description: ID sensor 2 error
An abnormal value is detected in the input data to ID sensor 2.
Causes: Defective connector cable or poor contact in the connector.
Defective engine PWB.
Remedy: Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. ID sensor 2 and feed PWB 1 (YC10) Feed PWB 1 (YC1) and engine PWB (YC6)
Defective engine PWB. Replace the engine PWB and check for correct operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie