Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 4820w — Trang 3/3

Code: E-080

Description: Density Sensor Error
The default output of Density Sensor reaches less than 0.1V or more than 1.3V.
Remedy: Wires 1 Is the wire between Toner Density Sensor and PW12420 PCB connected properly? No Connect it properly. Density Sensor (PH11) 2 Can you fix the problem if you replace Density Sensor? No Replace PW12420 with a new one.

Code: E-081

Description: Density Sensor Output Error
The gap between the default output and the standard output of Density Sensor reaches less than 2V.
Remedy: Wires 1 Is the wire between Toner Density Sensor and PW12420 PCB connected properly? No Connect it properly. Density Sensor (PH11) 2 Can you fix the problem if you replace Density Sensor? No Replace PW12420 with a new one.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie