Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Kyocera TASKalfa 5500i

Code: 0030

Description: FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem.
Causes: Defective FAX control PWB.
Remedy: Replace the fax control PWB and check for correct operation.

Code: 0070

Description: FAX control PWB incompatible detection error
Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted.
Causes: Defective FAX software.
Defective FAX control PWB.
Remedy: Defective FAX software. Install the fax software.
Defective FAX control PWB. Replace the fax control PWB and check for correct operation.

Code: 0100

Description: Backup memory device error
Causes: Defective flash memory.
Defective main PWB.
Remedy: Defective flash memory. Replace the main PWB and check for correct operation.
Defective main PWB. Replace the main PWB and check for correct operation.

Code: 0120

Description: MAC address data error
For data in which the MAC address is invalid.
Causes: Defective flash memory
Defective engine PWB.
Remedy: Defective flash memory. Replace the main PWB and check for correct operation.
Defective engine PWB. Replace the engine PWB and check for correct operation.

Code: 0150

Description: Backup memory read/write error (engine PWB)
No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated 5 times successively. Mismatch of reading data from 2 locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively.
Causes: Improper installation EEPROM.
Device damage of EEPROM.
Remedy: Improper installation EEPROM. Check the installation of the EEPROM and remedy if necessary.
Defective engine PWB. Replace the engine PWB and check for correct operation.
Device damage of EEPROM. Contact the Service Administrative Division.

Code: 0160

Description: Backup memory data error (engine PWB)
Reading data from EEPROM is abnormal.
Causes: Data damage of EEPROM.
Remedy: Contact the Service Administrative Division.

Code: 0170

Description: Billing counting error
A checksum error is detected in the main and engine backup memories for the billing counters.
Causes: Data damage of EEPROM.
Defective PWB.
Remedy: Data damage of EEPROM. Contact the Service Administrative Division.
Defective PWB. Replace the main PWB or the engine PWB and check for correct operation.

Code: 0180

Description: Machine number mismatch
Machine number of main and engine does not match.
Causes: Data damage of EEPROM.
Remedy: Contact the Service Administrative Division.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie