Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C734dn — Trang 6/28

Code: 201.24

Description: A 201.08 jam occurred and was notcleared. Possible cause Failure to open and close the top access door.
Remedy: This error is generated as a protection for possible paper wrap in the fuser. • Open the top access door, and check for a paper jam. Close the top access door.

Code: 201.31

Description: Paper is jammed between the inputsensor and the exit sensor during warm-up. Possible causes:
• Damaged paper exit sensor or paper exit sensor flag.
• Transport belt module failure.
• Lower guide failure
• Damaged fuser autoconnect.
• Faulty fuser DC cable connection.
• Faulty fuser.
• Faulty system board.
Remedy: • Check for anything in the paper path that might cause the paper to jam.

Code: 202.02

Description: Exit sensor is made when printer tries to print from an idle state. Possible causes:
• Damaged paper exit sensor orpaper exit sensor flag
• Damaged fuser autoconnect
• Faulty fuser DC cable connection
• Faulty fuser
• Faulty system board
Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly.

Code: 202.12

Description: Exit sensor broke early. Possible causes:
• Damaged paper exit sensor orpaper exit sensor flag
• Faulty fuser
• Faulty system board
Remedy: The fuser exit sensor may not be functioning properly.

Code: 202.13

Description: Exit sensor never broke. Possible causes:
• Damaged paper exit sensor orpaper exit sensor flag
• Faulty fuser
• Faulty system board
• Faulty output bin flag
Remedy: • Check exit sensor flag on fuser for proper operation. Ensure that paper is not hanging on the flag. • The fuser exit sensor may not be functioning properly.

Code: 202.17

Description: Exit sensor is made when the printerpowers up or covers are closed. Possible causes:
• Damaged paper exit sensor or paper exit sensor flag
• Damaged fuser autoconnect
• Faulty fuser DC cable connection
• Faulty fuser
• Faulty system board
Remedy: • Check for anything in the paper path that might cause the paper to jam. • The fuser exit sensor may not be functioning properly

Code: 202.21

Description: Fuser motor stalled. Possible causes:
• Faulty cable/connector
• Faulty fuser motor
• Faulty system board
Remedy: • Check for anything in the paper path that might cause the paper to jam.

Code: 202.31

Description: Paper jam at exit sensor during warm-up. Possible causes:
• Damaged paper exit sensor orpaper exit sensor flag.
• Damaged fuser autoconnect.
• Faulty fuser DC cable connection.
• Faulty fuser.
• Faulty system board.
Remedy: • Check for anything in the paper path that might cause the paper to jam.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie