Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Lexmark C734dnw — Trang 18/28

Code: 84

Description: Replace <color> PC Unit
Remedy: • Replace the specified photoconductor unit using the instruction sheet that comes with the replacement specified photoconductor unit. • If the problem persists, replace the system board.

Code: 84

Description: <color> PC Unit Missing
Remedy: • Scroll down the operator panel to see if the printer is showing that all four of the PC units are missing. If so, check the HVPS cable between the system board and the HVPS. Ensure that the cable is not plugged in backwards on the HVPS. Disconnect and reconnect the cable to make sure there is good contact. • Insert or reinstall the specified photoconductor unit and see if problem clears. See “Photoconductor unit removal”. • Remove the top access cover assembly (see “Top access cover assembly removal”), and confirm that the camshaft follower (A) on the left side is not out of the groove (B). If the camshaft follower is out of the groove, raise the arm, use a screwdriver to ease the camshaft follower back into the groove. You need to press down to snap it into position. • Check the high voltage contacts path, especially the “finger” on the specified photoconductor unit (printer is shown with components removed for clarity) • If the contacts are good, replace the HVPS. See “High-voltage power supply (HVPS) removal”. • If the problem persists, replace the system board.

Code: 84

Description: <color> PC Unit Near Life Warning
Remedy: • Select Ignore to clear the message and continue printing. • Order the specified photoconductor unit. When print quality is reduced, install the new specified photoconductor unit using the instruction sheet that comes with the replacement specified photoconductor unit. • If the problem persists, replace the system board.

Code: 84.11

Description: <color> PC Unit Life Warning
Remedy: • Select Ignore to clear the message and continue printing. • Order the specified photoconductor unit. When print quality is reduced, install the new specified photoconductor unit using the instruction sheet that comes with the replacement specified photoconductor unit. • If the problem persists, replace the system board

Code: 88.xx

Description: <color> Cartridge Low
Remedy: • Show Me, View Supplies, and Tell Me More displays additional information. • Replace the specified toner cartridge. • Select Continue to clear the message and continue printing. • If the problem persists, replace the system board.

Code: 88.xx

Description: <color> Cartridge Nearly Low
Remedy: • Show Me, View Supplies, and Tell Me More displays additional information. • Replace the specified toner cartridge. • Select Continue to clear the message and continue printing. • If the problem persists, replace the system board

Code: 88.xx

Description: Replace <color> Cartridge
Remedy: • Show Me, View Supplies, and Tell Me More displays additional information. • Replace the specified toner cartridge. • Select Continue to clear the message and continue printing. • If the problem persists, replace the system board.

Code: 900.00...900.99

Description: Software Error (except 900.05)
Unrecoverable RIP software error.
Remedy: 1 POR the device. Does the error reoccur? Go to step 2. Problem resolved.
2 • Write down the exact 900.xx error code displayed on the device. • Turn the device off. • Clear the print queues. • Disconnect all communication cables, and remove all memory options. • Remove all ISP and modem cards. • Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 3. Go to step 6.
3 Check all the cables connected to the RIP board for proper connectivity. Are the cables properly connected? Go to step 5. Go to step 4.
4 Properly connect the cables to the RIP board. Restart the device into diagnostic mode. Does the 900.xx error reoccur during startup? Go to step 5. Go to step 6.
5 Replace the RIP board, and restart the device. Does this fix the problem? Note: If an error, different from the original 900.xx, is displayed, consult the service check for that error. Problem resolved. Go to step 31.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie